First, I successfully flashed the Angstrom dMMC image to the BBB but then I issues trying to get the BBB to work using Ethernet. Someone from support suggested I use Debian instead because Angstrom is not being supported any longer. I've been trying to flash the Debian eMMC image to the BBB with no success. The Debian image I downloaded from the BB site does not have the "flasher" embedded in the name and I cannot find it anywhere. It seems it should be readily available. I found the following instructions but I am really new to the BBB and to programing so I am getting lost in the how to . . .
How do I do the following? Where do I find the /boot/uEnv.txt? What do I use to edit it? Flashing eMMC To setup the standalone microSD image to automatically flash the eMMC on powerup. **Note, img files with the words "eMMC-flasher" already had this enabled...** In /boot/uEnv.txt: ##enable BBB: eMMC Flasher: #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh Change to: ##enable BBB: eMMC Flasher: cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh and reboot the system, it'll flash the eMMC on the next bootup. (make sure to remove the microSD after flashing is complete) I am assuming this procedure will boot using the image I already have on the microSD which does not have the "flasher" embedded in. Your assistance greatly appreciated. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/baf609c1-eda5-473d-a9d1-55e36721bd63%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
