On Tue, Aug 2, 2016 at 12:49 PM, Lidia Toscano <[email protected]> wrote:
> First, I successfully flashed the Angstrom dMMC image to the BBB but then I
> issues trying to get the BBB to work using Ethernet.  Someone from support
> suggested I use Debian instead because Angstrom is not being supported any
> longer.  I've been trying to flash the Debian eMMC image to the BBB with no
> success.  The Debian image I downloaded from the BB site does not have the
> "flasher" embedded in the name and I cannot find it anywhere.  It seems it
> should be readily available.  I found the following instructions but I am
> really new to the BBB and to programing so I am getting lost in the how to .
> . .
>
> How do I do the following?  Where do I find the /boot/uEnv.txt?  What do I
> use to edit it?
>
> Flashing eMMC
>
> To setup the standalone microSD image to automatically flash the eMMC on
> powerup. *Note, img files with the words "eMMC-flasher" already had this
> enabled...*
>
> In /boot/uEnv.txt:
>
> ##enable BBB: eMMC Flasher:
> #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
>
> Change to:
>
> ##enable BBB: eMMC Flasher:
> cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
>
> and reboot the system, it'll flash the eMMC on the next bootup. (make sure
> to remove the microSD after flashing is complete)
>
>
> I am assuming this procedure will boot using the image I already have on the
> microSD which does not have the "flasher" embedded in.

sudo nano /boot/uEnv.txt

scroll to bottom, make change, "ctl-x" to save and exit...

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYipFn%2BPEXAC5mCeqXJVoWHdBkh8%3DW9%3D5rD7Y1oKTy%2BrTQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to