I have the flasher image on the uSD card from the eLinux link, but when I hold down the boot button to boot, I do not get any indication on the 4 LEDs. Nothing, even after 1 minute of holding it down. I confirmed I can read from the uSD card-- on normal boot, I can read from /boot/uboot just fine, editing the uEnv.txt file and all.
I have an element 14 BBB (rev. c). Is it possible that has anything to do with why I can't boot from uSD card? On Tuesday, August 2, 2016 at 1:10:18 PM UTC-7, William Hermans wrote: > > On Tue, Aug 2, 2016 at 12:43 PM, Lidia Toscano <[email protected] >> <javascript:>> wrote: >> >>> After editing the uEnv.txt file my BBB is still not flashing. The LEDs >>>> come on and stay lit after only a couple of seconds as though it had been >>>> flashed. Any other ideas? >>>> >>> >>> Thanks. >>> >>> oops right. This could be an older boot loader issue. So, in order to > boot from the sdcard, you may need to press, and hold down the boot button. > Which is at the opposite end of the board from the ethernet port, and a > little to the left, Only button on that side of the board . . > > Anyway, heh. Press and hold the button until you see a blink pattern on > the LEDs, then you can let go. > > Let us know if that solves your issue. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2ea6ea51-2356-4216-b497-d380e316dca3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
