> On Sep 14, 2016, at 5:24 PM, Robert Nelson <[email protected]> wrote: > > > >> On Wed, Sep 14, 2016 at 3:41 PM, Siddharth Amaravadi >> <[email protected]> wrote: >> Thank you for the response, but the pins are named as SIG and NC on the >> board. These are the pins that I connected to the P9_19 and P9_20 >> respectively >>> SIG -> P9_19 >>> NC -> P9_20 >> >> The sensor related information can be found at >> http://wiki.seeedstudio.com/wiki/Grove_-_Temperature_Sensor_V1.2 > > That senor out put's analog data... It's not i2c, spi, or usart... > > and don't even think about wiring it to the adc on the bbg, it's got too much > voltage 0-5...
Unless you use a voltage divider. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAOCHtYijDoSwkoyiB5UW%2Bbx2xsiHUtqv-tAGf%3DYQA8cZdL4N7w%40mail.gmail.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/859410E3-07F1-44E2-A4C3-5BE39D87B3DE%40gmail.com. For more options, visit https://groups.google.com/d/optout.
