On Mon, Sep 19, 2016 at 2:22 PM, Lidia Toscano <lidia.tosc...@gmail.com> wrote:
> Here is the newbie again! I am learning how to use the BB UARTs. I am
> working on the example at
> The minicom commands are not working for me.
> #first terminal window:
> minicom -b 9600 -D /dev/ttyO1
> #second terminal window:
> minicom -b 9600 -D /dev/ttyO2
> I modified the program slighty thinking I could setup UART1 and UART2, cross
> the RX/TX of UART 1 and UART 2 as per the directions.
> Since I can't get the minicom to work for me is there another way I test
> everything is working?
> Here is my program in Python:
> import Adafruit_BBIO.UART as UART
> import serial
> #tty1 RX = P9_26 TX = P9_24
> ser = serial.Serial(port = "/dev/tty1", baudrate=9600)
> #tty2 RX = P9_22 TX = P9_21
> ser = serial.Serial(port = "/dev/tty2", baudrate=9600)
For more options, visit http://beagleboard.org/discuss
You received this message because you are subscribed to the Google Groups
To unsubscribe from this group and stop receiving emails from it, send an email
To view this discussion on the web visit
For more options, visit https://groups.google.com/d/optout.