Hi Robert --
>From the most recent 11-06-2016 image just returns...nothing
root@beaglebone:~# cat /etc/dogtag
BeagleBoard.org Debian Image 2016-11-06
root@beaglebone:~# dmesg | grep wlcore
root@beaglebone:~#
BTW, search of an earlier dmesg output (12-05img) showed no results on
"wl*", "wl18*" in the text file. See attached.
Will test your 12-12 IOT and respond back here.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/d1661468-858a-4fff-a6ef-711d03136a2b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
root@beaglebone:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.36-ti-r71 (root@a1-imx6q-wandboard-2gb) (gcc
version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Sun Dec 4 02:56:26 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine model: TI AM335x BeagleBone Black
[ 0.000000] cma: Reserved 48 MiB at 0x9c800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] free_area_init_node: node 0, pgdat c105d2c0, node_mem_map
df961000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon )
[ 0.000000] PERCPU: Embedded 13 pages/cpu @df917000 s24320 r8192 d20736
u53248
[ 0.000000] pcpu-alloc: s24320 r8192 d20736 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 129408
[ 0.000000] Kernel command line: console=ttyO0,115200n8
root=UUID=bdc8ed7a-da53-41a5-9616-f449ceb87456 ro rootfstype=ext4 rootwait
coherent_pool=1M quiet cape_universal=enable
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 444808K/522240K available (11365K kernel code, 917K
rwdata, 3796K rodata, 748K init, 907K bss, 28280K reserved, 49152K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0ed694c (15163 kB)
.init : 0xc0ed7000 - 0xc0f92000 ( 748 kB)
.data : 0xc0f92000 - 0xc1077528 ( 918 kB)
.bss : 0xc107a000 - 0xc115cfa8 ( 908 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128
interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000014] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
89478484971ns
[ 0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 79635851949 ns
[ 0.000048] OMAP clocksource: timer1 at 24000000 Hz
[ 0.001354] clocksource_probe: no matching clocksources found
[ 0.001558] Console: colour dummy device 80x30
[ 0.001585] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.001594] This ensures that you still see kernel messages. Please
[ 0.001600] update your kernel commandline.
[ 0.001620] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[ 0.046817] pid_max: default: 32768 minimum: 301
[ 0.046970] Security Framework initialized
[ 0.046984] Yama: becoming mindful.
[ 0.047021] AppArmor: AppArmor disabled by boot time parameter
[ 0.047190] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.047201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.048050] Initializing cgroup subsys io
[ 0.048082] Initializing cgroup subsys memory
[ 0.048127] Initializing cgroup subsys devices
[ 0.048146] Initializing cgroup subsys freezer
[ 0.048162] Initializing cgroup subsys net_cls
[ 0.048177] Initializing cgroup subsys perf_event
[ 0.048193] Initializing cgroup subsys net_prio
[ 0.048217] Initializing cgroup subsys pids
[ 0.048276] CPU: Testing write buffer coherency: ok
[ 0.048339] ftrace: allocating 34633 entries in 102 pages
[ 0.146421] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.146555] Setting up static identity map for 0x80008280 - 0x800082d8
[ 0.150672] Brought up 1 CPUs
[ 0.150696] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[ 0.150704] CPU: All CPU(s) started in SVC mode.
[ 0.152448] devtmpfs: initialized
[ 0.173153] VFP support v0.3: implementor 41 architecture 3 part 30 variant
c rev 3
[ 0.192694] omap_hwmod: debugss: _wait_target_disable failed
[ 0.246558] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.250578] xor: measuring software checksum speed
[ 0.286818] arm4regs : 1219.000 MB/sec
[ 0.326813] 8regs : 1091.000 MB/sec
[ 0.366812] 32regs : 1089.000 MB/sec
[ 0.406810] neon : 1721.000 MB/sec
[ 0.406818] xor: using function: neon (1721.000 MB/sec)
[ 0.406945] pinctrl core: initialized pinctrl subsystem
[ 0.409082] NET: Registered protocol family 16
[ 0.412756] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.414087] cpuidle: using governor ladder
[ 0.414111] cpuidle: using governor menu
[ 0.419771] OMAP GPIO hardware version 0.1
[ 0.432036] No ATAGs?
[ 0.432069] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.432689] omap4_sram_init:Unable to allocate sram needed to handle errata
I688
[ 0.432704] omap4_sram_init:Unable to get sram pool needed to handle errata
I688
[ 0.511018] raid6: int32x1 gen() 228 MB/s
[ 0.578990] raid6: int32x1 xor() 176 MB/s
[ 0.646861] raid6: int32x2 gen() 301 MB/s
[ 0.714968] raid6: int32x2 xor() 198 MB/s
[ 0.782848] raid6: int32x4 gen() 281 MB/s
[ 0.850902] raid6: int32x4 xor() 199 MB/s
[ 0.918896] raid6: int32x8 gen() 280 MB/s
[ 0.986934] raid6: int32x8 xor() 186 MB/s
[ 1.054815] raid6: neonx1 gen() 1463 MB/s
[ 1.122813] raid6: neonx1 xor() 846 MB/s
[ 1.190824] raid6: neonx2 gen() 1886 MB/s
[ 1.258833] raid6: neonx2 xor() 1165 MB/s
[ 1.326832] raid6: neonx4 gen() 1928 MB/s
[ 1.394814] raid6: neonx4 xor() 1204 MB/s
[ 1.462861] raid6: neonx8 gen() 1188 MB/s
[ 1.530817] raid6: neonx8 xor() 843 MB/s
[ 1.530825] raid6: using algorithm neonx4 gen() 1928 MB/s
[ 1.530832] raid6: .... xor() 1204 MB/s, rmw enabled
[ 1.530839] raid6: using intx1 recovery algorithm
[ 1.540188] edma 49000000.edma: TI EDMA DMA engine driver
[ 1.545293] SCSI subsystem initialized
[ 1.545735] libata version 3.00 loaded.
[ 1.546083] usbcore: registered new interface driver usbfs
[ 1.546159] usbcore: registered new interface driver hub
[ 1.546268] usbcore: registered new device driver usb
[ 1.546966] omap_i2c 44e0b000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[ 1.547021] omap_i2c 4819c000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
[ 1.547147] media: Linux media interface: v0.10
[ 1.547209] Linux video capture interface: v2.00
[ 1.547319] pps_core: LinuxPPS API ver. 1 registered
[ 1.547327] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 1.547355] PTP clock support registered
[ 1.548245] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 1.549605] NetLabel: Initializing
[ 1.549622] NetLabel: domain hash size = 128
[ 1.549629] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.549693] NetLabel: unlabeled traffic allowed by default
[ 1.550114] clocksource: Switched to clocksource timer1
[ 1.660040] NET: Registered protocol family 2
[ 1.660897] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.660945] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.661005] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.661081] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.661103] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.661418] NET: Registered protocol family 1
[ 1.662034] RPC: Registered named UNIX socket transport module.
[ 1.662049] RPC: Registered udp transport module.
[ 1.662056] RPC: Registered tcp transport module.
[ 1.662062] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.662832] Unpacking initramfs...
[ 2.041575] Freeing initrd memory: 5036K (cfb15000 - d0000000)
[ 2.042362] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5
counters available
[ 2.044962] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 2.045092] audit: initializing netlink subsys (disabled)
[ 2.045181] audit: type=2000 audit(1.976:1): initialized
[ 2.055582] zbud: loaded
[ 2.056320] VFS: Disk quotas dquot_6.6.0
[ 2.056589] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.059418] NFS: Registering the id_resolver key type
[ 2.059499] Key type id_resolver registered
[ 2.059508] Key type id_legacy registered
[ 2.059536] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.059938] fuse init (API version 7.23)
[ 2.060602] SGI XFS with ACLs, security attributes, realtime, no debug
enabled
[ 2.069046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
249)
[ 2.069305] io scheduler noop registered
[ 2.069323] io scheduler deadline registered
[ 2.069390] io scheduler cfq registered (default)
[ 2.070898] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 2.072614] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 2.074001] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 2.077358] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud
= 3000000) is a 8250
[ 2.090780] console [ttyS0] enabled
[ 2.092367] [drm] Initialized drm 1.1.0 20060810
[ 2.146166] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 2.146191] davinci_mdio 4a101000.mdio: no live phy, scanning all
[ 2.146540] davinci_mdio: probe of 4a101000.mdio failed with error -5
[ 2.160364] cpsw 4a100000.ethernet: Detected MACID = 50:65:83:d6:06:a5
[ 2.173468] cpsw 4a100000.ethernet: cpts: overflow check period 2125
[ 2.175184] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.175250] ehci-platform: EHCI generic platform driver
[ 2.175433] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.175863] usbcore: registered new interface driver usb-storage
[ 2.177902] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 2.180492] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine,
bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.180513] musb-hdrc: MHDRC RTL version 2.0
[ 2.180521] musb-hdrc: setup fifo_mode 4
[ 2.180540] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.182231] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 2.184471] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine,
bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.184490] musb-hdrc: MHDRC RTL version 2.0
[ 2.184499] musb-hdrc: setup fifo_mode 4
[ 2.184514] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.184656] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 2.184691] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus
number 1
[ 2.185023] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.185038] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.185048] usb usb1: Product: MUSB HDRC host driver
[ 2.185057] usb usb1: Manufacturer: Linux 4.4.36-ti-r71 musb-hcd
[ 2.185065] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 2.185959] hub 1-0:1.0: USB hub found
[ 2.186018] hub 1-0:1.0: 1 port detected
[ 2.196106] mousedev: PS/2 mouse device common for all mice
[ 2.198748] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 2.199609] i2c /dev entries driver
[ 2.201211] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 2.201624] cpuidle: enable-method property 'ti,am3352' found operations
[ 2.202546] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 2.267652] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.268372] usbcore: registered new interface driver usbhid
[ 2.268385] usbhid: USB HID core driver
[ 2.268669] ashmem: initialized
[ 2.269477] remoteproc0: wkup_m3 is available
[ 2.269492] remoteproc0: Note: remoteproc is still under development and
considered experimental.
[ 2.269500] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and
backward compatibility isn't yet guaranteed.
[ 2.276363] NET: Registered protocol family 10
[ 2.278286] mip6: Mobile IPv6
[ 2.278319] NET: Registered protocol family 17
[ 2.278465] Key type dns_resolver registered
[ 2.278568] mpls_gso: MPLS GSO support
[ 2.278924] omap_voltage_late_init: Voltage driver support not added
[ 2.287314] PM: Cannot get wkup_m3_ipc handle
[ 2.292923] ThumbEE CPU extension supported.
[ 2.295035] Registering SWP/SWPB emulation handler
[ 2.296125] registered taskstats version 1
[ 2.296317] zswap: loaded using pool lzo/zbud
[ 2.300299] Btrfs loaded
[ 2.325276] mmc1: MAN_BKOPS_EN bit is not set
[ 2.325774] Key type encrypted registered
[ 2.329179] input: tps65217_pwr_but as
/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 2.333815] mmc1: new high speed MMC card at address 0001
[ 2.334964] mmcblk1: mmc1:0001 S10004 3.56 GiB
[ 2.335412] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
[ 2.335832] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
[ 2.337060] mmcblk1: p1
[ 2.352382] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 2.352990] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.353241] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 2.355192] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.355631] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.356028] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.356424] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.356468] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 2.357719] remoteproc0: powering up wkup_m3
[ 2.357789] remoteproc0: Booting fw image am335x-pm-firmware.elf, size
217148
[ 2.358048] remoteproc0: remote processor wkup_m3 is now up
[ 2.358072] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
[ 2.363784] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,,'
[ 2.363816] bone_capemgr bone_capemgr:
compatible-baseboard=ti,beaglebone-black - #slots=4
[ 2.402119] bone_capemgr bone_capemgr: slot #0: No cape found
[ 2.446113] bone_capemgr bone_capemgr: slot #1: No cape found
[ 2.490110] bone_capemgr bone_capemgr: slot #2: No cape found
[ 2.534109] bone_capemgr bone_capemgr: slot #3: No cape found
[ 2.539999] bone_capemgr bone_capemgr: initialized OK.
[ 2.541155] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq:
300000000, volt: 950000, enabled: 1. New: freq: 300000000, volt: 1100000,
enabled: 1
[ 2.541183] cpu cpu0: _of_add_opp_table_v2: Failed to add OPP, -17
[ 2.547626] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table
for cpu:0, -17
[ 2.556236] PM: bootloader does not support rtc-only!
[ 2.557214] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01
00:00:00 UTC (946684800)
[ 2.557244] of_cfs_init
[ 2.557374] of_cfs_init: OK
[ 2.563079] PM: Hibernation image not present or could not be loaded.
[ 2.564697] Freeing unused kernel memory: 748K (c0ed7000 - c0f92000)
[ 2.785372] random: systemd-udevd: uninitialized urandom read (16 bytes
read, 24 bits of entropy available)
[ 2.790423] random: systemd-udevd: uninitialized urandom read (16 bytes
read, 24 bits of entropy available)
[ 2.790647] random: systemd-udevd: uninitialized urandom read (16 bytes
read, 24 bits of entropy available)
[ 2.803770] random: udevadm: uninitialized urandom read (16 bytes read, 24
bits of entropy available)
[ 2.804238] random: udevadm: uninitialized urandom read (16 bytes read, 24
bits of entropy available)
[ 2.804416] random: udevadm: uninitialized urandom read (16 bytes read, 24
bits of entropy available)
[ 2.805169] random: udevadm: uninitialized urandom read (16 bytes read, 24
bits of entropy available)
[ 2.805781] random: udevadm: uninitialized urandom read (16 bytes read, 24
bits of entropy available)
[ 2.806681] random: udevadm: uninitialized urandom read (16 bytes read, 24
bits of entropy available)
[ 2.807361] random: udevadm: uninitialized urandom read (16 bytes read, 24
bits of entropy available)
[ 11.009233] EXT4-fs (mmcblk1p1): INFO: recovery required on readonly
filesystem
[ 11.009259] EXT4-fs (mmcblk1p1): write access will be enabled during recovery
[ 11.305610] EXT4-fs (mmcblk1p1): recovery complete
[ 11.308250] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode.
Opts: (null)
[ 11.694689] systemd[1]: System time before build time, advancing clock.
[ 11.734397] systemd[1]: Failed to insert module 'kdbus': Function not
implemented
[ 11.767365] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 11.768112] systemd[1]: Detected architecture arm.
[ 11.769393] systemd[1]: Set hostname to <beaglebone>.
[ 12.340015] systemd[1]: Listening on Syslog Socket.
[ 12.341535] systemd[1]: Created slice System Slice.
[ 12.343604] systemd[1]: Set up automount Arbitrary Executable File Formats
File System Automount Point.
[ 12.344423] systemd[1]: Listening on Journal Audit Socket.
[ 12.344749] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 12.344865] systemd[1]: Reached target Swap.
[ 12.344991] systemd[1]: Reached target Encrypted Volumes.
[ 12.345958] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 12.346699] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.347174] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 12.348141] systemd[1]: Created slice system-getty.slice.
[ 12.348634] systemd[1]: Listening on Journal Socket.
[ 12.352763] systemd[1]: Mounting /sys/kernel/debug...
[ 12.370564] systemd[1]: Starting Journal Service...
[ 12.459117] systemd[1]: Starting File System Check on Root Device...
[ 12.484343] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.484958] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 12.630662] systemd[1]: Starting Load Kernel Modules...
[ 12.649965] systemd[1]: Created slice User and Session Slice.
[ 12.650523] systemd[1]: Reached target Slices.
[ 12.651173] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 12.651326] systemd[1]: Reached target Paths.
[ 12.651441] systemd[1]: Reached target Remote File Systems (Pre).
[ 12.651554] systemd[1]: Reached target Remote File Systems.
[ 12.694047] systemd[1]: Starting LSB: Set console font and keymap...
[ 12.754058] systemd[1]: Starting Create list of required static device nodes
for the current kernel...
[ 12.812382] systemd[1]: Listening on udev Kernel Socket.
[ 12.818968] systemd[1]: Listening on udev Control Socket.
[ 12.924260] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.924610] systemd[1]: Mounted /sys/kernel/debug.
[ 12.954547] systemd[1]: Started File System Check on Root Device.
[ 12.961276] systemd[1]: Started Load Kernel Modules.
[ 12.972210] systemd[1]: Started LSB: Set console font and keymap.
[ 12.978804] systemd[1]: Started Create list of required static device nodes
for the current kernel.
[ 13.005874] systemd[1]: Started File System Check Daemon to report status.
[ 13.028608] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.098551] systemd[1]: Starting Apply Kernel Variables...
[ 13.135004] systemd[1]: Mounting FUSE Control File System...
[ 13.184577] systemd[1]: Mounting Configuration File System...
[ 13.320608] systemd[1]: Mounted FUSE Control File System.
[ 13.321585] systemd[1]: Started Journal Service.
[ 13.794309] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro
[ 14.305272] systemd-journald[526]: Received request to flush runtime journal
from PID 1
[ 14.754731] random: nonblocking pool is initialized
[ 19.792424] net eth0: initializing cpsw version 1.12 (0)
[ 19.792454] net eth0: initialized cpsw ale version 1.4
[ 19.792464] net eth0: ALE Table size 1024
[ 19.794151] libphy: PHY 4a101000.mdio:00 not found
[ 19.799005] net eth0: phy "4a101000.mdio:00" not found on slave 0, err -19
[ 20.000819] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.037402] using random self ethernet address
[ 20.037432] using random host ethernet address
[ 20.037453] using host ethernet address: 50:65:83:D6:06:A6
[ 20.037463] using self ethernet address: 50:65:83:D6:06:A7
[ 20.116919] Mass Storage Function, version: 2009/09/11
[ 20.116949] LUN: removable file: (no medium)
[ 20.117174] LUN: removable read only file:
/var/cache/doc-beaglebone-getting-started/beaglebone-getting-started-2016-11-07.img
[ 20.117186] Number of LUNs=1
[ 20.121464] usb0: HOST MAC 50:65:83:d6:06:a6
[ 20.122285] usb0: MAC 50:65:83:d6:06:a7
[ 20.138634] g_multi gadget: Multifunction Composite Gadget
[ 20.138670] g_multi gadget: g_multi ready
[ 20.699948] g_multi gadget: high-speed config #1: Multifunction with RNDIS
[ 37.957365] tda998x 0-0070: found TDA19988
[ 37.961825] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops [tda998x])
[ 37.961861] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 37.961869] [drm] No driver support for vblank timestamp query.
[ 37.966730] tilcdc 4830e000.lcdc: No connectors reported connected with modes
[ 37.966777] [drm] Cannot find any crtc or sizes - going 1024x768
[ 38.016615] Console: switching to colour frame buffer device 128x48
[ 38.150474] tilcdc 4830e000.lcdc: fb0: frame buffer device
[ 38.150521] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[ 38.157647] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[ 40.309638] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 40.422884] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 45.442699] bone_capemgr bone_capemgr: part_number 'cape-universaln',
version 'N/A'
[ 45.442739] bone_capemgr bone_capemgr: slot #4: override
[ 45.442756] bone_capemgr bone_capemgr: Using override eeprom data at slot 4
[ 45.442774] bone_capemgr bone_capemgr: slot #4: 'Override Board
Name,00A0,Override Manuf,cape-universaln'
[ 45.901585] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0
[ 45.901785] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1
[ 45.901957] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2
[ 45.910534] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3
[ 45.910785] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4
[ 45.910962] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5
[ 45.911124] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6
[ 45.911275] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7
[ 45.911473] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8
[ 45.911677] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9
[ 45.911842] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10
[ 45.912042] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11
[ 45.912199] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12
[ 45.912366] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13
[ 45.912527] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14
[ 45.912676] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15
[ 45.912835] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16
[ 45.912992] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17
[ 45.913151] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18
[ 45.913306] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19
[ 45.913458] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20
[ 45.913707] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21
[ 45.913873] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22
[ 45.914029] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23
[ 45.931885] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24
[ 45.932121] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25
[ 45.932408] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26
[ 45.932582] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27
[ 45.932740] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28
[ 45.932914] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29
[ 45.933074] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30
[ 45.933233] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31
[ 45.933397] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32
[ 45.933409] gpio-of-helper ocp:cape-universal: ready
[ 45.948081] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 187, base_baud
= 3000000) is a 8250
[ 45.959902] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 188, base_baud
= 3000000) is a 8250
[ 45.970611] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 189, base_baud
= 3000000) is a 8250
[ 46.028556] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[ 46.048597] bone_capemgr bone_capemgr: slot #4: dtbo
'cape-universaln-00A0.dtbo' loaded; overlay id #0
[ 46.345825] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok
[ 48.567010] eqep 48300180.eqep: ver. 1.0
[ 48.582606] eqep 48302180.eqep: ver. 1.0
[ 48.594972] eqep 48304180.eqep: ver. 1.0
[ 48.772300] CAN device driver interface
[ 48.880777] c_can_platform 481cc000.can: c_can_platform device registered
(regs=fa1cc000, irq=198)
[ 48.918380] c_can_platform 481d0000.can: c_can_platform device registered
(regs=fa1d0000, irq=199)
root@beaglebone:~#
