Hello, I am having a problem with getting the USB Ethernet bridge working with the suggestion 12-05-2016 image. When I connect the BBBWL I get the windows partion to show up, which usually means the virutal ethernet port is loaded. Which it does load, but it doesn't get a 192.168.7.1 address, instead it gets a 169.254.244.251 address. Usually a disconnect and reconnect will fix this problem, but no such luck. I am downloading some of the latest images to try, but I am curious if this is a known issue?
Please note, the driver seems to be working as a my Rev C board is connecting up correctly. Cheers, Gregg On Tuesday, December 13, 2016 at 4:40:33 AM UTC-8, Mark wrote: > > Hi Robert -- > > So yes, success. Although I will still beg your advice on the eeprom > problem. I have found that booting from SD card causes some problem with > dropping my shell connxn, something not encountered if I just flash the > onboard eMMC. I wonder if this is going to be a problem down the road when > I want to boot off an 8 or 16 GB card. > > root@beaglebone:~# dmesg | grep wlcore > [ 43.191825] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) > [ 43.272449] wlcore: loaded > [ 43.734400] wlcore: PHY firmware version: Rev 8.2.0.0.236 > [ 43.783333] wlcore: firmware booted (Rev 8.9.0.0.69) > [ 48.563112] wlcore: Association completed. > root@beaglebone:~# > > connmanctl> services wifi_my-hash_managed_psk > /net/connman/service/wifi_my-hash_managed_psk > Type = wifi > Security = [ psk, wps ] > State = online > Strength = 57 > Favorite = True > Immutable = False > AutoConnect = True > Name = SBG6580A9 > Ethernet = [ Method=auto, Interface=wlan0, Address=50:65:83:D6:06:A5, > MTU=1500 ] > IPv4 = [ Method=manual, Address=192.168.0.133, Netmask=255.255.255.0, > Gateway=192.168.0.1 ] > IPv4.Configuration = [ Method=manual, Address=192.168.0.133, > Netmask=255.255.255.0, > Gateway=192.168.0.1 ] > IPv6 = [ ] > IPv6.Configuration = [ Method=auto, Privacy=disabled ] > Nameservers = [ 8.8.8.8, 8.8.4.4 ] > Nameservers.Configuration = [ 8.8.8.8, 8.8.4.4 ] > Timeservers = [ 192.168.0.1 ] > Timeservers.Configuration = [ ] > Domains = [ www.google.com ] > Domains.Configuration = [ www.google.com ] > Proxy = [ Method=direct ] > Proxy.Configuration = [ ] > Provider = [ ] > connmanctl> quit > root@beaglebone:~# > root@beaglebone:~# uname -a > Linux beaglebone 4.4.30-ti-r64 #1 SMP Fri Nov 4 21:23:33 UTC 2016 armv7l > GNU/Linux > root@beaglebone:~# cat /etc/dogtag > BeagleBoard.org Debian Image 2016-11-06 > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1228b97e-75b8-4237-a2e5-3fe996351f28%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
