Hello Gregg -- Sorry to hear you are having problems with your new board.
What do you get when you type 192.168.7.2 into your web browser? These boards prefer Chrome. Are you booting from the SD card, or flashing the eMMC and booting from there? Mark On Wednesday, December 14, 2016 at 9:31:08 AM UTC-10, Gregg Harrington wrote: > > Hello, > > I am having a problem with getting the USB Ethernet bridge working with > the suggestion 12-05-2016 image. When I connect the BBBWL I get the windows > partion to show up, which usually means the virutal ethernet port is > loaded. Which it does load, but it doesn't get a 192.168.7.1 address, > instead it gets a 169.254.244.251 address. Usually a disconnect and > reconnect will fix this problem, but no such luck. I am downloading some of > the latest images to try, but I am curious if this is a known issue? > > Please note, the driver seems to be working as a my Rev C board is > connecting up correctly. > > Cheers, > > Gregg > > > On Tuesday, December 13, 2016 at 4:40:33 AM UTC-8, Mark wrote: >> >> Hi Robert -- >> >> So yes, success. Although I will still beg your advice on the eeprom >> problem. I have found that booting from SD card causes some problem with >> dropping my shell connxn, something not encountered if I just flash the >> onboard eMMC. I wonder if this is going to be a problem down the road when >> I want to boot off an 8 or 16 GB card. >> >> root@beaglebone:~# dmesg | grep wlcore >> [ 43.191825] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) >> [ 43.272449] wlcore: loaded >> [ 43.734400] wlcore: PHY firmware version: Rev 8.2.0.0.236 >> [ 43.783333] wlcore: firmware booted (Rev 8.9.0.0.69) >> [ 48.563112] wlcore: Association completed. >> root@beaglebone:~# >> >> connmanctl> services wifi_my-hash_managed_psk >> /net/connman/service/wifi_my-hash_managed_psk >> Type = wifi >> Security = [ psk, wps ] >> State = online >> Strength = 57 >> Favorite = True >> Immutable = False >> AutoConnect = True >> Name = SBG6580A9 >> Ethernet = [ Method=auto, Interface=wlan0, Address=50:65:83:D6:06:A5, >> MTU=1500 ] >> IPv4 = [ Method=manual, Address=192.168.0.133, Netmask=255.255.255.0, >> Gateway=192.168.0.1 ] >> IPv4.Configuration = [ Method=manual, Address=192.168.0.133, >> Netmask=255.255.255.0, >> Gateway=192.168.0.1 ] >> IPv6 = [ ] >> IPv6.Configuration = [ Method=auto, Privacy=disabled ] >> Nameservers = [ 8.8.8.8, 8.8.4.4 ] >> Nameservers.Configuration = [ 8.8.8.8, 8.8.4.4 ] >> Timeservers = [ 192.168.0.1 ] >> Timeservers.Configuration = [ ] >> Domains = [ www.google.com ] >> Domains.Configuration = [ www.google.com ] >> Proxy = [ Method=direct ] >> Proxy.Configuration = [ ] >> Provider = [ ] >> connmanctl> quit >> root@beaglebone:~# >> root@beaglebone:~# uname -a >> Linux beaglebone 4.4.30-ti-r64 #1 SMP Fri Nov 4 21:23:33 UTC 2016 armv7l >> GNU/Linux >> root@beaglebone:~# cat /etc/dogtag >> BeagleBoard.org Debian Image 2016-11-06 >> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/eda8e966-4666-46b1-940e-60194f6a3284%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
