Bert, Show us the output of the command:
*root@beaglebone:~#* ifconfig -a On Fri, Jan 20, 2017 at 4:41 PM, Bert Beckmann <[email protected]> wrote: > thanks for the quick replies > > so I need to rebuild the kernel in order to change 'dr_mode' to 'otg'? > (it would be much more useful if we didn't have to do this) > > when I boot as is - usb0 comes up ready to network - wouldn't that mean > it's already setup as otg ? > usb0 Link encap:Ethernet HWaddr 22:87:1a:2a:80:6a > > If I do this - do I connect usb mini to usb mini ? or mini to full size > usb as I've been doing ? > > also - why don't I usb0 or usb1 in /dev? I do see /dev/bus/usb/001 and > then /dev/buf/usb/002 when I plug in the 2nd BBB to the full size USB on > the first. I assume somewhere I have to assign an ip? > it seems like usb0 and usb1 exist but not as I'd expect > > Bert > > On Friday, January 20, 2017 at 4:04:38 PM UTC-7, Bert Beckmann wrote: >> >> Is this possible? I see that RP zero and RP 3 can do this. I have tried >> with no luck so far (mini/otg port on one to full USB on the other) and >> have searched the internet for an example. I see that the mini ports come >> up as usb/ethernet/device ports - can they be connect together? Or how to >> we get the full USB port to act as a host and also act as ethernet device? >> This would be very useful. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/8be4b8ee-bd5f-484f-8ce4-f170ca53346b%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/8be4b8ee-bd5f-484f-8ce4-f170ca53346b%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORo2qSZT7u5fUomYV%3Dpoo3ibiaerughFC7k-FJww603BgQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
