Hi Guys, I’m struggling to get the device address (MPU-9250). i got to the following stage:
root@beaglebone:~# sudo i2cdetect -r 0 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-0 using read byte commands. I will probe address range 0x03-0x77. Continue? [Y/n] y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: — — — — — — — — — — — — — 10: — — — — — — — — — — — — — — — — 20: — — — — UU — — — — — — — — — — — 30: — — — — UU — — — — — — — — — — — 40: — — — — — — — — — — — — — — — — 50: UU — — — — — — — — — — — — — — — 60: — — — — — — — — — — — — — — — — 70: UU — — — — — — — root@beaglebone:~# sudo i2cdetect -r 1 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-1 using read byte commands. I will probe address range 0x03-0x77. Continue? [Y/n] y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: — — — — — — — — — — — — — 10: — — — — — — — — — — — — — — — — 20: — — — — — — — — — — — — — — — — 30: — — — — — — — — — — — — — — — — 40: — — — — — — — — — — — — — — — — 50: — — — — UU UU UU UU — — — — — — — — 60: — — — — — — — — — — — — — — — — 70: — — — — — — — — But even after connecting my device It is still the same (I mean it still doesn't show the device's address). Any advise? Thanks -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2cc02398-8925-4043-9ea5-4e9efe2dd49e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
