The MPU-9250 breakout from spark fun come with pull up resistors.

On 09 Mar 2017 00:42, "Graham" <[email protected]> wrote:

> Something is not wired right.
> Did you put pull-up resistors on the I2C lines?
> --- Graham
>
> ==
>
> On Wednesday, March 8, 2017 at 12:02:04 PM UTC-6, [email protected]
> wrote:
>>
>> Hi Guys,
>>
>> I’m struggling to get the device address (MPU-9250). i got to the
>> following stage:
>>
>>
>> root@beaglebone:~# sudo i2cdetect -r 0
>> WARNING! This program can confuse your I2C bus, cause data loss and worse!
>> I will probe file /dev/i2c-0 using read byte commands.
>> I will probe address range 0x03-0x77.
>> Continue? [Y/n] y
>> 0 1 2 3 4 5 6 7 8 9 a b c d e f
>> 00: — — — — — — — — — — — — —
>> 10: — — — — — — — — — — — — — — — —
>> 20: — — — — UU — — — — — — — — — — —
>> 30: — — — — UU — — — — — — — — — — —
>> 40: — — — — — — — — — — — — — — — —
>> 50: UU — — — — — — — — — — — — — — —
>> 60: — — — — — — — — — — — — — — — —
>> 70: UU — — — — — — —
>> root@beaglebone:~# sudo i2cdetect -r 1
>> WARNING! This program can confuse your I2C bus, cause data loss and worse!
>> I will probe file /dev/i2c-1 using read byte commands.
>> I will probe address range 0x03-0x77.
>> Continue? [Y/n] y
>> 0 1 2 3 4 5 6 7 8 9 a b c d e f
>> 00: — — — — — — — — — — — — —
>> 10: — — — — — — — — — — — — — — — —
>> 20: — — — — — — — — — — — — — — — —
>> 30: — — — — — — — — — — — — — — — —
>> 40: — — — — — — — — — — — — — — — —
>> 50: — — — — UU UU UU UU — — — — — — — —
>> 60: — — — — — — — — — — — — — — — —
>> 70: — — — — — — — —
>>
>>
>> But even after connecting my device It is still the same (I mean it still
>> doesn't show the device's address). Any advise?
>>
>> Thanks
>>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAPTvsHjEnyNUAp72xTcN%2B0yCskeCpnxr5WyOHhUb7qPmsShvCg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to