On Fri, Mar 24, 2017 at 10:04 PM, Andrew DeVries <[email protected]> wrote: > I saw this > https://github.com/StrawsonDesign/Robotics_Cape_Installer/issues/16 But > thats from December would assume the fix made March Image.
Assume what? We wave a magic wand and redesign the BBGW??? The BBGW and Robotic's Cape are not compatible. There is no software fix for this. > > On Friday, March 24, 2017 at 10:32:28 PM UTC-4, Andrew DeVries wrote: >> >> 8.7 3/19/2017 Image Any reason why enabling robotics cape "sudo >> configure_robotics_dt.sh" causes the WIFI adapter to not work after a reboot >> connmanctl only show eth0 no usb or wif or bluetooth. copy back the >> uEnv.txt.bak and reboot and all works as expected. Is there something >> different in the hardware that causes the overlay to drop the wifi adapter. One of the I/O line's on the Robotic's Cape, knocks out the wl1835 irq line. Thus on a BBGW, if you enable this cape, you'll lose "all" communication with the wl1835. The Robotic Cape is only compatible with the BBB, BBG, and BBBW. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjy6UA_BUk9pEnrvAKucsVKvAifwj5FqRWyOOP2jcBOEg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
