So I've had the Blue a couple of weeks and I've had it working with some servos as I try to put together a Robot Arm for my elementary school daughter to learn to program with (preferably with Node_Red or Scratch).
Over the weekend I decided to move the antennae around to face out and in the process I knocked the 10pf cap going to antenna 2 off the board. The board was off so I thought no big deal as I soldered the cap back on. I'll put a new cap on once the 10pf 0402 caps for a work project get here. Well the Wifi still doesn't work (It was fine) and when I do an ifconfig it does not see the WLAN (only USB, local loopback and CAN). dmesg shows some errors, but none look to me like they would have anything to do with the WIFI. I've got 1.8V so the WIFI is getting power, and no other parts show damage when viewed under the scope. Any debugging advice for someone new to the Beagle family and not a Linux expert (although I've used UNIX and other embedded OSes over the years)? What should I look for failing during boot to indicate why the WLAN is not being seen? Rob LaMoreaux -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/921ca923-c44e-4961-a66e-3fcc9b61cad2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
