Robert,
I broke down and got another BBBL which I will use mobile, while I use the
original for development and testing while tethered to USB.
I'll check the signals with a scope on the original as I get time in case
it is something like the oscillator.
I did notice that the broken one has the WIFI light come on then go off at
reset and the new one it does not come on
One question I had. With the new SDCARD image, the eMMC flashing
instructions say to uncomment the line in /boot/uEnv.txt
#cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
I noticed in the /opt/scripts/tools/eMMC directory that there is a file called
init-eMMC-flasher-v3-bbbl.sh stuff that appears to be for updating the eMMC on
the BBBL. SSo my question is for updating the BBBL should I make that line read:
cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3-bbbl.sh
Lastly, is there a better place to discuss and learn more on the BBBL?
Rob
On Wednesday, April 5, 2017 at 2:28:39 PM UTC-4, RobertCNelson wrote:
> On Wed, Apr 5, 2017 at 1:21 PM, Robert LaMoreaux
> <[email protected] <javascript:>> wrote:
> > Well I made an new SDCARD using the 19MArch release and it doesn't see
> the
> > the WLAN0 (Nor wifi), but it does see USB0 and USB1 LANs which is
> different
> > from the February release the board came with.
>
> This is a new feature to allow networking to work with both Windows &
> mac without an external (signed) driver install.
>
> >
> > The USB to Serial cable should be here tomorrow so I'll try logging from
> it
> > when I can, but I have a board for work coming in tomorrow so I will be
> > busy.
> >
> > Attached is the dmesg log after flashing the March 19 release to eMMC.
>
> Nothing obvious, nor helpful. The wl1835 does seem to be making any
> noise..
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/5885ae0e-4bc5-48f9-9a91-a8613cb04138%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
