Well I made an new SDCARD using the 19MArch release and it doesn't see the the WLAN0 (Nor wifi), but it does see USB0 and USB1 LANs which is different from the February release the board came with.
The USB to Serial cable should be here tomorrow so I'll try logging from it when I can, but I have a board for work coming in tomorrow so I will be busy. Attached is the dmesg log after flashing the March 19 release to eMMC. Rob > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7b5c8686-a86c-4c10-9c22-cc0535b21376%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
login as: debian Debian GNU/Linux 8 BeagleBoard.org Debian Image 2017-03-19 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] [email protected]'s password: The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian@beaglebone:~$ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1128 errors:0 dropped:0 overruns:0 frame:0 TX packets:1128 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:87520 (85.4 KiB) TX bytes:87520 (85.4 KiB) usb0 Link encap:Ethernet HWaddr f4:5e:ab:4a:a5:bd inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 inet6 addr: fe80::f65e:abff:fe4a:a5bd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:508 errors:0 dropped:0 overruns:0 frame:0 TX packets:74 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:81766 (79.8 KiB) TX bytes:19054 (18.6 KiB) usb1 Link encap:Ethernet HWaddr f4:5e:ab:4a:a5:c0 inet addr:192.168.6.2 Bcast:192.168.6.3 Mask:255.255.255.252 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) debian@beaglebone:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.54-ti-r93 (root@a4-imx6q-wandboard-2gb) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Fri Mar 17 13:08:22 UTC 2017 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone Blue [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 130560 [ 0.000000] free_area_init_node: node 0, pgdat c105f300, node_mem_map df961000 [ 0.000000] Normal zone: 1152 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (sgx neon ) [ 0.000000] PERCPU: Embedded 13 pages/cpu @df8f0000 s24320 r8192 d20736 u53248 [ 0.000000] pcpu-alloc: s24320 r8192 d20736 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129408 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=UUID=f85ff1b1-5272-4298-8078-c1b2028bfc80 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 444476K/522240K available (11374K kernel code, 917K rwdata, 3800K rodata, 744K init, 907K bss, 28612K reserved, 49152K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0ed9b54 (15175 kB) .init : 0xc0eda000 - 0xc0f94000 ( 744 kB) .data : 0xc0f94000 - 0xc10795d0 ( 918 kB) .bss : 0xc107c000 - 0xc115efa8 ( 908 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz [ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000050] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000063] OMAP clocksource: timer1 at 24000000 Hz [ 0.002391] clocksource_probe: no matching clocksources found [ 0.002709] Console: colour dummy device 80x30 [ 0.002741] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.002750] This ensures that you still see kernel messages. Please [ 0.002756] update your kernel commandline. [ 0.002778] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) [ 0.020800] pid_max: default: 32768 minimum: 301 [ 0.020950] Security Framework initialized [ 0.020964] Yama: becoming mindful. [ 0.021001] AppArmor: AppArmor disabled by boot time parameter [ 0.021184] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.021196] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.022055] Initializing cgroup subsys io [ 0.022087] Initializing cgroup subsys memory [ 0.022134] Initializing cgroup subsys devices [ 0.022152] Initializing cgroup subsys freezer [ 0.022169] Initializing cgroup subsys net_cls [ 0.022184] Initializing cgroup subsys perf_event [ 0.022199] Initializing cgroup subsys net_prio [ 0.022224] Initializing cgroup subsys pids [ 0.022284] CPU: Testing write buffer coherency: ok [ 0.022344] ftrace: allocating 34653 entries in 102 pages [ 0.120444] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.120565] Setting up static identity map for 0x80008280 - 0x800082e0 [ 0.124695] Brought up 1 CPUs [ 0.124721] SMP: Total of 1 processors activated (995.32 BogoMIPS). [ 0.124729] CPU: All CPU(s) started in SVC mode. [ 0.126389] devtmpfs: initialized [ 0.165174] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.222019] omap_hwmod: debugss: _wait_target_disable failed [ 0.263479] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.263515] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.267515] xor: measuring software checksum speed [ 0.304777] arm4regs : 1219.000 MB/sec [ 0.344774] 8regs : 1090.000 MB/sec [ 0.384773] 32regs : 1089.000 MB/sec [ 0.424772] neon : 1739.000 MB/sec [ 0.424780] xor: using function: neon (1739.000 MB/sec) [ 0.424900] pinctrl core: initialized pinctrl subsystem [ 0.427573] NET: Registered protocol family 16 [ 0.431298] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.433255] cpuidle: using governor ladder [ 0.433282] cpuidle: using governor menu [ 0.439104] OMAP GPIO hardware version 0.1 [ 0.441787] GPIO line 106 (LS_BUF_EN) hogged as output/high [ 0.458153] No ATAGs? [ 0.458192] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.459435] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.459456] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.536792] raid6: int32x1 gen() 229 MB/s [ 0.604781] raid6: int32x1 xor() 175 MB/s [ 0.672938] raid6: int32x2 gen() 304 MB/s [ 0.740778] raid6: int32x2 xor() 198 MB/s [ 0.808894] raid6: int32x4 gen() 284 MB/s [ 0.876869] raid6: int32x4 xor() 199 MB/s [ 0.944881] raid6: int32x8 gen() 282 MB/s [ 1.012887] raid6: int32x8 xor() 186 MB/s [ 1.080787] raid6: neonx1 gen() 1466 MB/s [ 1.148783] raid6: neonx1 xor() 846 MB/s [ 1.216802] raid6: neonx2 gen() 1887 MB/s [ 1.284793] raid6: neonx2 xor() 1175 MB/s [ 1.352775] raid6: neonx4 gen() 1927 MB/s [ 1.420774] raid6: neonx4 xor() 1203 MB/s [ 1.488779] raid6: neonx8 gen() 1187 MB/s [ 1.556806] raid6: neonx8 xor() 844 MB/s [ 1.556814] raid6: using algorithm neonx4 gen() 1927 MB/s [ 1.556821] raid6: .... xor() 1203 MB/s, rmw enabled [ 1.556828] raid6: using intx1 recovery algorithm [ 1.566792] edma 49000000.edma: TI EDMA DMA engine driver [ 1.575097] SCSI subsystem initialized [ 1.575548] libata version 3.00 loaded. [ 1.575896] usbcore: registered new interface driver usbfs [ 1.575972] usbcore: registered new interface driver hub [ 1.576094] usbcore: registered new device driver usb [ 1.576946] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe [ 1.577808] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 400 kHz [ 1.578470] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 400 kHz [ 1.578733] media: Linux media interface: v0.10 [ 1.578803] Linux video capture interface: v2.00 [ 1.578919] pps_core: LinuxPPS API ver. 1 registered [ 1.578928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 1.578956] PTP clock support registered [ 1.579880] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 1.581424] NetLabel: Initializing [ 1.581442] NetLabel: domain hash size = 128 [ 1.581448] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.581511] NetLabel: unlabeled traffic allowed by default [ 1.581948] clocksource: Switched to clocksource timer1 [ 1.694062] NET: Registered protocol family 2 [ 1.694928] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 1.694979] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 1.695038] TCP: Hash tables configured (established 4096 bind 4096) [ 1.695120] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.695141] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.695477] NET: Registered protocol family 1 [ 1.696092] RPC: Registered named UNIX socket transport module. [ 1.696108] RPC: Registered udp transport module. [ 1.696115] RPC: Registered tcp transport module. [ 1.696121] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.696846] Unpacking initramfs... [ 2.083041] Freeing initrd memory: 5132K (cfafd000 - d0000000) [ 2.083721] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available [ 2.087004] audit: initializing netlink subsys (disabled) [ 2.087106] audit: type=2000 audit(2.028:1): initialized [ 2.097906] zbud: loaded [ 2.098693] VFS: Disk quotas dquot_6.6.0 [ 2.098957] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.101718] NFS: Registering the id_resolver key type [ 2.101792] Key type id_resolver registered [ 2.101799] Key type id_legacy registered [ 2.101829] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.102327] fuse init (API version 7.23) [ 2.102987] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.111684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.111956] io scheduler noop registered [ 2.111974] io scheduler deadline registered [ 2.112045] io scheduler cfq registered (default) [ 2.113696] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 2.119290] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 2.120969] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 2.124445] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250 [ 2.137882] console [ttyS0] enabled [ 2.138852] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 159, base_baud = 3000000) is a 8250 [ 2.139652] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 160, base_baud = 3000000) is a 8250 [ 2.140477] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 161, base_baud = 3000000) is a 8250 [ 2.141215] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 162, base_baud = 3000000) is a 8250 [ 2.142069] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 163, base_baud = 3000000) is a 8250 [ 2.143928] [drm] Initialized drm 1.1.0 20060810 [ 2.155456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.155515] ehci-platform: EHCI generic platform driver [ 2.155775] ehci-omap: OMAP-EHCI Host Controller driver [ 2.156335] usbcore: registered new interface driver usb-storage [ 2.159303] 47401300.usb-phy supply vcc not found, using dummy regulator [ 2.162082] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 2.162104] musb-hdrc: MHDRC RTL version 2.0 [ 2.162113] musb-hdrc: setup fifo_mode 4 [ 2.162133] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 2.164291] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 2.166883] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 2.166903] musb-hdrc: MHDRC RTL version 2.0 [ 2.166912] musb-hdrc: setup fifo_mode 4 [ 2.166929] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 2.167094] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 2.167138] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 2.167463] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.167477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.167486] usb usb1: Product: MUSB HDRC host driver [ 2.167496] usb usb1: Manufacturer: Linux 4.4.54-ti-r93 musb-hcd [ 2.167504] usb usb1: SerialNumber: musb-hdrc.1.auto [ 2.168481] hub 1-0:1.0: USB hub found [ 2.168547] hub 1-0:1.0: 1 port detected [ 2.178989] mousedev: PS/2 mouse device common for all mice [ 2.181868] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 2.183142] i2c /dev entries driver [ 2.185485] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.186225] cpuidle: enable-method property 'ti,am3352' found operations [ 2.187215] omap_hsmmc 48060000.mmc: Got CD GPIO [ 2.292638] mmc1: MAN_BKOPS_EN bit is not set [ 2.300022] mmc1: new high speed MMC card at address 0001 [ 2.301111] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.301549] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.302039] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.303314] mmcblk1: p1 [ 2.361313] hidraw: raw HID events driver (C) Jiri Kosina [ 2.362484] usbcore: registered new interface driver usbhid [ 2.362500] usbhid: USB HID core driver [ 2.366112] ashmem: initialized [ 2.367329] remoteproc0: wkup_m3 is available [ 2.367347] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 2.367355] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 2.371844] NET: Registered protocol family 10 [ 2.374594] mip6: Mobile IPv6 [ 2.374625] NET: Registered protocol family 17 [ 2.374784] Key type dns_resolver registered [ 2.374802] mpls_gso: MPLS GSO support [ 2.375098] omap_voltage_late_init: Voltage driver support not added [ 2.382967] PM: Cannot get wkup_m3_ipc handle [ 2.387521] ThumbEE CPU extension supported. [ 2.387555] Registering SWP/SWPB emulation handler [ 2.388637] registered taskstats version 1 [ 2.388842] zswap: loaded using pool lzo/zbud [ 2.392789] Btrfs loaded [ 2.417877] Key type encrypted registered [ 2.421534] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0 [ 2.444318] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.444977] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.445036] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.446477] remoteproc0: powering up wkup_m3 [ 2.446796] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148 [ 2.447094] remoteproc0: remote processor wkup_m3 is now up [ 2.447117] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ 2.448652] PM: bootloader does not support rtc-only! [ 2.449768] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.449802] of_cfs_init [ 2.450152] of_cfs_init: OK [ 2.456304] PM: Hibernation image not present or could not be loaded. [ 2.456348] wlan-en-regulator: disabling [ 2.458077] Freeing unused kernel memory: 744K (c0eda000 - c0f94000) [ 2.685155] random: systemd-udevd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.685900] random: systemd-udevd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.690388] random: systemd-udevd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.703809] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.704264] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.704462] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.705174] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.705789] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.706721] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 2.707324] random: udevadm: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 4.909823] ti-pruss 4a300000.pruss: creating PRU cores and other child platform devices [ 4.913686] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! [ 4.954392] irq: no irq domain found for /ocp/pruss@4a300000/intc@4a320000 ! [ 4.993026] remoteproc1: 4a334000.pru0 is available [ 4.993054] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 4.993062] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 4.993349] remoteproc1: Direct firmware load for am335x-pru0-fw failed with error -2 [ 4.993370] remoteproc1: failed to load am335x-pru0-fw [ 5.033475] pru-rproc 4a334000.pru0: booting the PRU core manually [ 5.033511] remoteproc1: powering up 4a334000.pru0 [ 5.033618] remoteproc1: Direct firmware load for am335x-pru0-fw failed with error -2 [ 5.033635] remoteproc1: request_firmware failed: -2 [ 5.038862] pru-rproc 4a334000.pru0: rproc_boot failed [ 5.138066] remoteproc1: releasing 4a334000.pru0 [ 5.140468] pru-rproc: probe of 4a334000.pru0 failed with error -2 [ 5.140955] remoteproc1: 4a338000.pru1 is available [ 5.140971] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 5.140980] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 5.141239] remoteproc1: Direct firmware load for am335x-pru1-fw failed with error -2 [ 5.141260] remoteproc1: failed to load am335x-pru1-fw [ 5.162275] pru-rproc 4a338000.pru1: booting the PRU core manually [ 5.162309] remoteproc1: powering up 4a338000.pru1 [ 5.162426] remoteproc1: Direct firmware load for am335x-pru1-fw failed with error -2 [ 5.162443] remoteproc1: request_firmware failed: -2 [ 5.167610] pru-rproc 4a338000.pru1: rproc_boot failed [ 5.287043] remoteproc1: releasing 4a338000.pru1 [ 5.287210] pru-rproc: probe of 4a338000.pru1 failed with error -2 [ 11.299130] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 11.686560] systemd[1]: System time before build time, advancing clock. [ 11.725434] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 11.761676] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 11.762642] systemd[1]: Detected architecture arm. [ 11.763921] systemd[1]: Set hostname to <beaglebone>. [ 12.339352] systemd[1]: Reached target Encrypted Volumes. [ 12.340920] systemd[1]: Created slice System Slice. [ 12.341865] systemd[1]: Created slice system-getty.slice. [ 12.342671] systemd[1]: Listening on Journal Socket (/dev/log). [ 12.343030] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 12.343470] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 12.343838] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 12.343944] systemd[1]: Reached target Paths. [ 12.345579] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 12.345752] systemd[1]: Reached target Swap. [ 12.346779] systemd[1]: Listening on Journal Audit Socket. [ 12.346940] systemd[1]: Reached target Remote File Systems (Pre). [ 12.347254] systemd[1]: Listening on fsck to fsckd communication Socket. [ 12.348130] systemd[1]: Created slice User and Session Slice. [ 12.348266] systemd[1]: Reached target Slices. [ 12.348366] systemd[1]: Reached target Remote File Systems. [ 12.348778] systemd[1]: Listening on udev Control Socket. [ 12.349026] systemd[1]: Listening on Syslog Socket. [ 12.350204] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 12.350598] systemd[1]: Listening on udev Kernel Socket. [ 12.351025] systemd[1]: Listening on Journal Socket. [ 12.356099] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 12.394321] systemd[1]: Starting LSB: Set console font and keymap... [ 12.430882] systemd[1]: Starting File System Check on Root Device... [ 12.493010] systemd[1]: Mounting POSIX Message Queue File System... [ 12.535717] systemd[1]: Starting Journal Service... [ 12.565674] systemd[1]: Mounting /sys/kernel/debug... [ 12.771525] systemd[1]: Starting Load Kernel Modules... [ 12.885050] systemd[1]: Mounted POSIX Message Queue File System. [ 12.885396] systemd[1]: Mounted /sys/kernel/debug. [ 12.911466] eqep 48300180.eqep: ver. 1.0 [ 12.911515] eqep 48300180.eqep: unable to select pin group [ 12.915299] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 12.922382] eqep 48302180.eqep: ver. 1.0 [ 12.922432] eqep 48302180.eqep: unable to select pin group [ 12.925243] systemd[1]: Started LSB: Set console font and keymap. [ 12.930413] eqep 48304180.eqep: ver. 1.0 [ 12.930467] eqep 48304180.eqep: unable to select pin group [ 12.943777] systemd[1]: Started File System Check on Root Device. [ 12.960663] systemd[1]: Started Load Kernel Modules. [ 13.013533] systemd[1]: Started File System Check Daemon to report status. [ 13.035654] systemd[1]: Mounting FUSE Control File System... [ 13.069044] systemd[1]: Mounting Configuration File System... [ 13.174893] systemd[1]: Starting Apply Kernel Variables... [ 13.211704] systemd[1]: Starting Create Static Device Nodes in /dev... [ 13.297150] systemd[1]: Mounted Configuration File System. [ 13.297528] systemd[1]: Mounted FUSE Control File System. [ 13.312181] systemd[1]: Started Journal Service. [ 13.898503] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro [ 14.507303] systemd-journald[577]: Received request to flush runtime journal from PID 1 [ 15.156037] random: nonblocking pool is initialized [ 39.131703] CAN device driver interface [ 39.346172] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=171) [ 40.086720] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 43.712674] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 43.927618] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 65.785603] using random self ethernet address [ 65.785633] using random host ethernet address [ 65.849622] using random self ethernet address [ 65.849654] using random host ethernet address [ 65.961799] Mass Storage Function, version: 2009/09/11 [ 65.961833] LUN: removable file: (no medium) [ 66.086243] usb0: HOST MAC f4:5e:ab:4a:a5:bc [ 66.086976] usb0: MAC f4:5e:ab:4a:a5:bd [ 66.095290] usb1: HOST MAC f4:5e:ab:4a:a5:bf [ 66.095928] usb1: MAC f4:5e:ab:4a:a5:c0 [ 66.375625] configfs-gadget gadget: high-speed config #1: c [ 66.718993] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready debian@beaglebone:~$
