I am a programmer, and have hands on with doing a few projects that fall into this category. What you're attempting to do does not sound very hard at all. But it could turn out to be fairly complex in nature. Tacking a few ADC values, GPI value as well as "toggling" a few GPO's is not that hard. Where it gets complex is in doing this smartly over a web app. By "smartly" I mean securely.
There is NodeRED, which I've heard is designed for engineers who have limited or even no programming experience. But, being a programmer, I'm not really keen on these types of hardware / software abstraction. So I know very little about it. It may be something for you to look into though. On Wed, Apr 19, 2017 at 3:17 PM, Ian Tulley <[email protected]> wrote: > Hi all, first off, I'm not a programmer so the reason for this question. I > want to see if there is already a BBB application to allow it to be used > for telemetry and or could be modified for what I need. > > I am able to supply an interface board that can go from the headers of the > BBB to do all the necessary level changes so as not to "destroy" the board > by over voltage inputs etc. > This is what I need to do. > > Analogue > DC Voltage measurements in the ranges of 9-15V and 44-55V (multiple inputs) > DC Amperage measurements in the ranges of 2-20A and 40-60A (multiple > inputs) > Temperature input (multiple) > > Digital In > Again multiple inputs for an On or Off state > > Digital Out > Multiple out for switching relays, depending on both Analogue and Digital > input levels. > > Be able to display the measurements and some control of outputs etc via a > Web Page. > > Hoping someone can help > > Regards > Ian > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/31a143f5-6625-4eb3-b70a-2bbbd0c8d883%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/31a143f5-6625-4eb3-b70a-2bbbd0c8d883%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORrt_KhNyGqCgG5BFkLjnv%2BZ%3D_KZh1LHR--%2B6OZM2_t64g%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
