Hi all, first off, I'm not a programmer so the reason for this question. I want to see if there is already a BBB application to allow it to be used for telemetry and or could be modified for what I need.
I am able to supply an interface board that can go from the headers of the BBB to do all the necessary level changes so as not to "destroy" the board by over voltage inputs etc. This is what I need to do. Analogue DC Voltage measurements in the ranges of 9-15V and 44-55V (multiple inputs) DC Amperage measurements in the ranges of 2-20A and 40-60A (multiple inputs) Temperature input (multiple) Digital In Again multiple inputs for an On or Off state Digital Out Multiple out for switching relays, depending on both Analogue and Digital input levels. Be able to display the measurements and some control of outputs etc via a Web Page. Hoping someone can help Regards Ian -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/31a143f5-6625-4eb3-b70a-2bbbd0c8d883%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
