Hi All, I am facing a very peculiar issue. I am using 3.8.13-bone81 with busybox RFS. Everything is working fine. But if i connect Bi-Directional Logic Level Converter to some gpio's the system freezes. Below is the serial logs.It would be great if someone could help me out.
U-Boot SPL 2017.01-rc1-00065-g53e8ca2 (Dec 14 2016 - 14:59:19) Trying to boot from MMC2Card did not respond to voltage select! *** Warning - MMC init failed, using default environment ** Partition 1 not valid on device 1 ** spl_register_fat_device: fat register err - -1 spl_load_image_fat: error reading image u-boot.img, err - -1 Card did not respond to voltage select! *** Warning - MMC init failed, using default environment spl: no partition table found SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a26af806-e8e1-41e7-9e26-a731db7eed0f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
