Thanks robert and dennis its working now . I changed my design. On Fri, 5 May 2017 at 8:57 PM, Dennis Lee Bieber <[email protected]> wrote:
> On Fri, 5 May 2017 09:10:45 -0500, Robert Nelson > <[email protected]> declaimed the > following: > > > > >Take a look at the SRM there's a whole section dedicated to those > >pin's with the limitation listed. > > > > It isn't obvious... > > Best I've found is table 6 (page 63) which uses the names > gpmc_can1, > gpmc_can2 (I think, the PDF is blurry), gpmc_ad0.._ad3 -- and then table 13 > (page 86) where one can match gpmc_a2 (NOT _ad2 as on table 6) to P9 pin > 14. One has to look elsewhere to find that P9 pin 14 is also known as > GPIO_50 (http://beagleboard.org/Support/bone101/#headers) > -- > Wulfraed Dennis Lee Bieber AF6VN > [email protected] HTTP://wlfraed.home.netcom.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/ot5pgc5gop7fr2336a8o0rcdb5q7ng5h5c%404ax.com > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CA%2B-ZLis1LFpCQz8%3DhV9Zwwz9B6qoOF4icjZJkpsfnvRFp8S7vQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
