Hi, Gpio50, gpio50, gpio 31. The problem is if i disconnect the logic level its working fine. I am using 3.3 to 5 v bi directional logic level . On Fri, 5 May 2017 at 6:46 PM, Dennis Lee Bieber <[email protected]> wrote:
> On Fri, 5 May 2017 00:48:51 -0700 (PDT), abhilash h > <[email protected]> declaimed the > following: > > >Hi All, > >I am facing a very peculiar issue. I am using 3.8.13-bone81 with busybox > >RFS. > >Everything is working fine. But if i connect Bi-Directional Logic Level > >Converter to some gpio's the system freezes. > > WHICH GPIO pins? > > http://beagleboard.org/Support/bone101/#headers > > Any pin starting with MMC1_ should not be used without turning off the > on-board eMMC (meaning you need to boot from an SD card -- and also pinmux > the MMC1_ pins to some other mode) > > -- > Wulfraed Dennis Lee Bieber AF6VN > [email protected] HTTP://wlfraed.home.netcom.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/b2uogc9qeq54timrt0olbnsm18o93vbc69%404ax.com > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CA%2B-ZLiuuDZm8Pdd5c19QzMpTEiK-KA4e-dCF7w5Uc7VH9sjyfQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
