I'll check, but I won't be able to try this until tonight. However this brings up another question; is there something I can try directly on the /dev/* devices to see if there is any problem at that level (and isolate any potential problems in the python lib)?
On Thu, May 18, 2017 at 8:35 AM, Robert Nelson <[email protected]> wrote: > On Thu, May 18, 2017 at 10:24 AM, Garth Webb <[email protected]> wrote: > > In the link I gave above (I think it was your advice actually) I added > these > > lines to /boot/uEnv.txt: > > > >> enable_uboot_overlays=1 > >> disable_uboot_overlay_audio=1 > >> enable_uboot_cape_universal=1 > > > > > > After rebooting with these settings, config-pin worked on pins P9.28 > through > > P9.31 where previously it complained that universala was not loaded. > > However, this is also when the python script that tried to write to these > > pins started to hang. > > Garth, > > What version of the Adafruit_BBIO library? > > CC'ing Drew, maintainer of that that library. (he's on the road this week) > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAMK9r2WVZY9KBxwcPFGAr%2Ba5Qwap%2BeOFZX_c6Z5Z%2BE02ATDpXQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
