I'm running Adafruit-BBIO Version: 1.0.0. On Thu, May 18, 2017 at 9:00 AM, Garth Webb <[email protected]> wrote:
> I'll check, but I won't be able to try this until tonight. However this > brings up another question; is there something I can try directly on the > /dev/* devices to see if there is any problem at that level (and isolate > any potential problems in the python lib)? > > On Thu, May 18, 2017 at 8:35 AM, Robert Nelson <[email protected]> > wrote: > >> On Thu, May 18, 2017 at 10:24 AM, Garth Webb <[email protected]> >> wrote: >> > In the link I gave above (I think it was your advice actually) I added >> these >> > lines to /boot/uEnv.txt: >> > >> >> enable_uboot_overlays=1 >> >> disable_uboot_overlay_audio=1 >> >> enable_uboot_cape_universal=1 >> > >> > >> > After rebooting with these settings, config-pin worked on pins P9.28 >> through >> > P9.31 where previously it complained that universala was not loaded. >> > However, this is also when the python script that tried to write to >> these >> > pins started to hang. >> >> Garth, >> >> What version of the Adafruit_BBIO library? >> >> CC'ing Drew, maintainer of that that library. (he's on the road this week) >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAMK9r2Xj3tM6aKwnJSfv%3Dkp_VwaLC%2BfeYyqnk1epW9ShHQwfzQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
