Are you still having issues with Adafruit_BBIO? thanks, drew
On Fri, May 19, 2017 at 1:50 AM, Garth Webb <[email protected]> wrote: > I'm running Adafruit-BBIO Version: 1.0.0. > > On Thu, May 18, 2017 at 9:00 AM, Garth Webb <[email protected]> wrote: >> >> I'll check, but I won't be able to try this until tonight. However this >> brings up another question; is there something I can try directly on the >> /dev/* devices to see if there is any problem at that level (and isolate any >> potential problems in the python lib)? >> >> On Thu, May 18, 2017 at 8:35 AM, Robert Nelson <[email protected]> >> wrote: >>> >>> On Thu, May 18, 2017 at 10:24 AM, Garth Webb <[email protected]> >>> wrote: >>> > In the link I gave above (I think it was your advice actually) I added >>> > these >>> > lines to /boot/uEnv.txt: >>> > >>> >> enable_uboot_overlays=1 >>> >> disable_uboot_overlay_audio=1 >>> >> enable_uboot_cape_universal=1 >>> > >>> > >>> > After rebooting with these settings, config-pin worked on pins P9.28 >>> > through >>> > P9.31 where previously it complained that universala was not loaded. >>> > However, this is also when the python script that tried to write to >>> > these >>> > pins started to hang. >>> >>> Garth, >>> >>> What version of the Adafruit_BBIO library? >>> >>> CC'ing Drew, maintainer of that that library. (he's on the road this >>> week) >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> https://rcn-ee.com/ >> >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAMK9r2Xj3tM6aKwnJSfv%3Dkp_VwaLC%2BfeYyqnk1epW9ShHQwfzQ%40mail.gmail.com. > > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAEf4M_Db2cE6N-dsTVYiqA8K1a8YQHQZ_dhpC2Dzxg9g533xBQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
