Hello, I am getting some issues to setup the libpruio to work with C. I am following this tutorial http://users.freebasic-portal.de/tjf/Projekte/libpruio/doc/html/_cha_preparation.html
I' have enabled the PRU <https://lh3.googleusercontent.com/-Pj9WkhIhTCc/WV_g-cPd19I/AAAAAAAADuI/Zr0mErBT7zE0dKRn03Ihgvupo_q68EeLwCLcBGAs/s1600/Capture.PNG> and I am trying to install libpruio following the step 3 from the tutorial but i got this error <https://lh3.googleusercontent.com/-EDQl2kGU5eQ/WV_inxTupGI/AAAAAAAADuM/P2exVzM-fHwV4R7dXFnbutYRkJErdgN3ACLcBGAs/s1600/Capture.PNG> I am doing some wrong? Still, Is the tutorial working for this kernel? Regards Dario On Friday, July 7, 2017 at 12:41:26 PM UTC-4, RobertCNelson wrote: > > > > On Fri, Jul 7, 2017 at 11:37 AM, Dario Guaman <[email protected] > <javascript:>> wrote: > >> Thanks Robert, >> >> But /boot/uEnv.txt it shows this >> >> >> >> <https://lh3.googleusercontent.com/-NyelohdGmtM/WV-38Y0fJqI/AAAAAAAADt4/__8Z3UJSTNME9Rdo8WDVZFjPXba3FlfcgCLcBGAs/s1600/Capture.PNG> >> >> >> Then, Is PRU enabled by default? >> > > it's setup for ti's remoteproc_pruss, so you need to: > > #uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-4-TI-00A0.dtbo > > and: > > uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0f4e50ce-e942-460d-82af-69044a7b683b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
