On Fri, Jul 7, 2017 at 2:38 PM, Dario Guaman <[email protected]> wrote:
> Hello, I am getting some issues to setup the libpruio to work with C. I am > following this tutorial http://users.freebasic-portal.de/tjf/ > Projekte/libpruio/doc/html/_cha_preparation.html > > I' have enabled the PRU > > > <https://lh3.googleusercontent.com/-Pj9WkhIhTCc/WV_g-cPd19I/AAAAAAAADuI/Zr0mErBT7zE0dKRn03Ihgvupo_q68EeLwCLcBGAs/s1600/Capture.PNG> > > > and I am trying to install libpruio following the step 3 from the tutorial > but i got this error > > > > <https://lh3.googleusercontent.com/-EDQl2kGU5eQ/WV_inxTupGI/AAAAAAAADuM/P2exVzM-fHwV4R7dXFnbutYRkJErdgN3ACLcBGAs/s1600/Capture.PNG> > > I am doing some wrong? > > Still, Is the tutorial working for this kernel? > You can't mix and match u-boot/kernel overlays, in /boot/uEnv.txt add: uboot_overlay_addr4=/lib/firmware/libpruio-0A00.dtbo Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhjbK0DP3y_zi8ScDd2AASWkSGaJPo8mHytobn-jCcEMA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
