Hey Acheesehead, funny name :) I'm sitting here with the same problem and want to use the adc of beaglebone black with qnx. But i cant figure out how it will work. Can help me? I read you did it and it works.
Best Regards Sethary Am Donnerstag, 12. März 2015 18:14:23 UTC+1 schrieb acheesehead: > > Got it! > > Steps 1 & 2 are not necessary. The rest is pretty straight-forward. > > On Wednesday, March 11, 2015 at 2:27:30 PM UTC-6, acheesehead wrote: >> >> I want to read the BBB ADC inputs using the QNX operating system. As no >> driver is provided in the QNX BSP, I need to write low-level C code to do >> this. I figure I need to do the following steps: >> >> 1. Put the pins in the right mux mode >> 2. Turn on the clock to the ADC >> 3. Set up the 'steps' >> 4. Start a conversion sequence >> 5. Wait for the sequence to end >> 6. Read the sampled values >> >> I have not found any low-level code that does this. It would be greatly >> appreciated if anybody could provide example register-level code to do this. >> >> Thanks in advance! >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b90196ca-bd39-4b5d-9b30-f19fc8e1b4c8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
