Sent you email with the files. On Friday, July 14, 2017 at 1:20:54 PM UTC-6, set...@gmx.de wrote: > > Hey Acheesehead, > > funny name :) I'm sitting here with the same problem and want to use the > adc of beaglebone black with qnx. But i cant figure out how it will work. > Can help me? I read you did it and it works. > > Best Regards > Sethary > > Am Donnerstag, 12. März 2015 18:14:23 UTC+1 schrieb acheesehead: >> >> Got it! >> >> Steps 1 & 2 are not necessary. The rest is pretty straight-forward. >> >> On Wednesday, March 11, 2015 at 2:27:30 PM UTC-6, acheesehead wrote: >>> >>> I want to read the BBB ADC inputs using the QNX operating system. As no >>> driver is provided in the QNX BSP, I need to write low-level C code to do >>> this. I figure I need to do the following steps: >>> >>> 1. Put the pins in the right mux mode >>> 2. Turn on the clock to the ADC >>> 3. Set up the 'steps' >>> 4. Start a conversion sequence >>> 5. Wait for the sequence to end >>> 6. Read the sampled values >>> >>> I have not found any low-level code that does this. It would be greatly >>> appreciated if anybody could provide example register-level code to do this. >>> >>> Thanks in advance! >>> >>>
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f122c966-e6e4-49b0-a40e-c79ec3f907bd%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
