I got it, thanks a lot. I found them in my Spamfolder - can't figure out why^^
Ok, i try to get it run now and will inform you if it works fine. Best Regards Sethary Am Samstag, 15. Juli 2017 18:17:02 UTC+2 schrieb acheesehead: > > Sent you email with the files. > > On Friday, July 14, 2017 at 1:20:54 PM UTC-6, [email protected] wrote: >> >> Hey Acheesehead, >> >> funny name :) I'm sitting here with the same problem and want to use the >> adc of beaglebone black with qnx. But i cant figure out how it will work. >> Can help me? I read you did it and it works. >> >> Best Regards >> Sethary >> >> Am Donnerstag, 12. März 2015 18:14:23 UTC+1 schrieb acheesehead: >>> >>> Got it! >>> >>> Steps 1 & 2 are not necessary. The rest is pretty straight-forward. >>> >>> On Wednesday, March 11, 2015 at 2:27:30 PM UTC-6, acheesehead wrote: >>>> >>>> I want to read the BBB ADC inputs using the QNX operating system. As no >>>> driver is provided in the QNX BSP, I need to write low-level C code to do >>>> this. I figure I need to do the following steps: >>>> >>>> 1. Put the pins in the right mux mode >>>> 2. Turn on the clock to the ADC >>>> 3. Set up the 'steps' >>>> 4. Start a conversion sequence >>>> 5. Wait for the sequence to end >>>> 6. Read the sampled values >>>> >>>> I have not found any low-level code that does this. It would be greatly >>>> appreciated if anybody could provide example register-level code to do >>>> this. >>>> >>>> Thanks in advance! >>>> >>>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/fefc43c5-e757-487d-897a-6719667b4840%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
