> > Hello Gerald, > I am Ashwin. I am using Beaglebone Black with 7.11 wheezy image with LCD monitor. Previously it was working fine.but suddenly it started to show blank screen. I have been following the thread about the HDMI issue in BBB closely and followed almost all the steps suggested by everyone but no use. I am still having the issue.
I have done checking about the 1) status of the device connected to hdmi port 2) parse-edid edid 3) changed the screen resolution and frame rate using xrandr as well as in /boot/uEnv,txt 4) Even reflashed 2 times but no use. I require your help with this one. Can you suggest me any other solution? Thanks in Advance, Regards, Ashwin -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4fc70b84-70c6-4478-88b8-1d9a1e82ec58%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.