I got myself a PocketBeagle and I realized that I cannot fit headers on the CPU components side because there is not enough clearance between the pads and the Octavo chip for the plastic of the header to fit in. I am using headers like these https://www.adafruit.com/product/2076, these https://www.mouser.co.uk/ProductDetail/Gravitech/20Mx2-254mm or sockets like these sockets https://www.mouser.co.uk/ProductDetail/Gravitech/4Fx2-254mm/ None of these would fit.
The alternative would be to place the sockets on the bottom side and put the solder on the components side, but it does not seem a great option. Are there any sockets/headers that you use that fit on the components side? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6a2af8dd-6332-46da-a697-92551e41e128%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
