On Sun, Oct 1, 2017 at 4:51 PM, Graham <[email protected]> wrote:
> Robert: > > OK. I found a Samtec part that will probably fit, but will need to get > some samples and try it. > > The part numbers are already set up in Digikey's system, but not stocked, > quoting large minimum quantities and three week delivery. > > Can you get samples from Samtec? Or, I can call in a favor from the local > Samtec rep. (He probably can't get sales credit for an end-sale to Digikey.) > > These are both 0.195 inch wide (nominal). > > 18x2 positions, gold flash on contacts, tin plated solder tabs for through > hole on PCB. Samtec # ESW-118-12-F-D > > or > > 18x2 positions, tin plated contacts, tin plated solder tabs for PCB > through hole. Samtec # ESW-118-12-T-D > > I personally prefer gold on gold for signals, but costs a dollar per > connector more. (Google "tin fretting") > Samples ordered.. So I'll check them out... I've already tried these: https://www.digikey.com/products/en?keywords=S7121-ND width: .200 5.08 I got them in, with a gap... Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYh5bNUozyNSUuC4fdA0hxGgpCk2OowZ2qTPsxYkVJB3bA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
