Robert: OK. I found a Samtec part that will probably fit, but will need to get some samples and try it.
The part numbers are already set up in Digikey's system, but not stocked, quoting large minimum quantities and three week delivery. Can you get samples from Samtec? Or, I can call in a favor from the local Samtec rep. (He probably can't get sales credit for an end-sale to Digikey.) These are both 0.195 inch wide (nominal). 18x2 positions, gold flash on contacts, tin plated solder tabs for through hole on PCB. Samtec # ESW-118-12-F-D or 18x2 positions, tin plated contacts, tin plated solder tabs for PCB through hole. Samtec # ESW-118-12-T-D I personally prefer gold on gold for signals, but costs a dollar per connector more. (Google "tin fretting") --- Graham == On Friday, September 29, 2017 at 10:07:28 PM UTC-5, RobertCNelson wrote: > > > > On Fri, Sep 29, 2017 at 10:03 PM, Graham <[email protected] <javascript:>> > wrote: > >> >> evilwulfie wrote: >> >> check out samtec >> >> -- >> >> Good idea. >> >> But Samtec mostly sells factory direct, so hard for hobbyists to get, >> unless some one who works at Digikey could get them to stock the part we >> would need. >> > > > Yeah, if we can get a part number, i'll push it up the grapevine.. ;) > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2e81fab5-13c2-468e-9553-7151ea67fa73%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
