On the pinouts 5,7,9,11,13 and 15 are shown as USB1. So: tie ID to Gnd (15,13) and 15 to gnd on the connector There is a Vin(7) and Vbus(5). One of those are not used for the +5 connection? So +5 goes to pin Vout(13)
Is Vin used when the power is flowing into the PB from the USB? Thanks Andy On Tue, Oct 10, 2017 at 12:00 PM, Dan Brown <[email protected]> wrote: > On the expansion connectors, the +5V from the built-in USB port is > connected to the pins labeled VOUT on the back. GND labels ground pins. > > On Saturday, October 7, 2017 at 3:05:43 PM UTC-4, Andy Bushnell wrote: >> >> Which pins are to +5 and gnd? >> >> Thanks! >> Andy >> >>> >>>> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/beagleboard/GOwSuY4oiyI/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/931b44e5-6abb-4214-af6c-2cabf14ee0d4%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/931b44e5-6abb-4214-af6c-2cabf14ee0d4%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAMaO1peFx3_rGfB%3Dn55Das09%2BZL0frtFLEZPDrm5OCbsss_wCA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
