Issue was solved via help from the IRC channel. Issue was the Extra pins needing to be shorted to GND and 5V.
I have now created a Expansion board that adds a Host port with proper switching of power, and ESD protection. Details are at: https://oshpark.com/shared_projects/IrizTrr1 On Friday, September 29, 2017 at 10:01:15 AM UTC-4, Dan Brown wrote: > > I have added a USB Type A connector to my Pocket Beagle. When I plug a > Kingston 8GB Flash Key into the port and boot the PocketBeagle, I can see > that the device is sort of detected, but I never get access to the Flash. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/939d8740-4030-4168-8052-39083c5dddab%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
