the problem was due to a 128GByte micro SD giving me problems also with
etcher,
using a samsung 32GByte micro SD and Etcher now I can program correctly
the sd card and is recognized during standard boot
Thanks,
Now I'll try finally to start the lcd 4.3 cape from waveshare.
On 12/28/2017 6:06 PM, Robert Nelson wrote:
On Thu, Dec 28, 2017 at 9:34 AM, <[email protected]> wrote:
Good morning,
I'm trying to update to start beagleBone black from SD card, concerning this
I've installed on the SD CARD
Debian 9.1 2017-08-31 4GB SD LXQT image from
http://beagleboard.org/latest-images
I've formatted the SD-CARD with HPUSBDisk-2.2.3.exe
and written the image with Win32DiskImager
I've followed the procedure:
0) remove power and/or usb connection
1) insert the SD CARD
2) Hold S2 button and insert power plug
the result is that the four led never flash as described, on the debug
connector I can see a long long long sequence of "C" characters.
It seems to me that the sd-card reader is broken, how can I check this?
I've no problem when starting from eMMC but I want to change the image on
the eMMC and it seems not possible.
Retry with etcher.io, we don't recommend Win32DiskImage anymore...
https://etcher.io/
Regards,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/71416f3e-bc6b-a943-0c77-392a8ea1fad5%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
