I don't know why but it seems that I can see just half of the screen
using the LCD cape and
Debian-sdcard-beaglebone-2015.02.27-LCD-cape-LCD4.3-v2.0
there is a procedure to follow to have this cape correctly working?
Thanks again
Antonio
On 12/28/2017 7:22 PM, Robert Nelson wrote:
On Thu, Dec 28, 2017 at 12:17 PM, etantonio <[email protected]> wrote:
the problem was due to a 128GByte micro SD giving me problems also with
etcher,
128GByte micro SD = SDXC, the Beagle's only support SD/SDHC (up to
32GB), "some" 64GB (SDXC) SanDisk microSD cards will work as they seem
to support the SDHC interface in a backwards compatibility...
using a samsung 32GByte micro SD and Etcher now I can program correctly the
sd card and is recognized during standard boot
Thanks,
Now I'll try finally to start the lcd 4.3 cape from waveshare.
Regards,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/744c7342-820b-f7ae-7fb8-16ca4b838259%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
