On Thu, Dec 28, 2017 at 12:17 PM, etantonio <[email protected]> wrote: > the problem was due to a 128GByte micro SD giving me problems also with > etcher,
128GByte micro SD = SDXC, the Beagle's only support SD/SDHC (up to 32GB), "some" 64GB (SDXC) SanDisk microSD cards will work as they seem to support the SDHC interface in a backwards compatibility... > using a samsung 32GByte micro SD and Etcher now I can program correctly the > sd card and is recognized during standard boot > > Thanks, > > Now I'll try finally to start the lcd 4.3 cape from waveshare. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiXbz4ycNd_%3DkFvTEQ-j5zu9%3DxwSpRerWJdjDREWm2VfQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
