Dear all, I have to warm up this post again as I'm dealing with a minor problem when setting my boards in AP mode:
I have two BBBs: 1 BBBW and one BBB rev. C On BBBW (4.4.30-ti-r64) the AP is started automatically, I can use /var/lib/connman/settings file to set the SSID and the passphrase, and I can connect to this board and get an IP in the range of 192.168.0.X On BBB with a TP-Link TL-WN722N (4.4.91-ti-r133) I try to do the same. Therefore, I uncommented to connman line in /etc/network/interfaces and edited the /var/lib/connman/settings (same setting as above). When I restart the board I can see the SSID and even connect (from Windows) but I don't get an IP. --> So I think I have to change another small thing to get it working 100% (a problem with the DHCP?). Can you please point me towards the right direction??? Would be great! Best regards, Marco -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6b32d111-50db-4f77-9ad6-1de430d59df9%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
