On Thu, Jan 4, 2018 at 8:27 AM, <[email protected]> wrote:
> Dear all,
>
> I have to warm up this post again as I'm dealing with a minor problem when
> setting my boards in AP mode:
>
> I have two BBBs: 1 BBBW and one BBB rev. C
>
> On BBBW (4.4.30-ti-r64) the AP is started automatically, I can use
> /var/lib/connman/settings file to set the SSID and the passphrase, and I can
> connect to this board and get an IP in the range of 192.168.0.X
>
> On BBB with a TP-Link TL-WN722N (4.4.91-ti-r133) I try to do the same.
> Therefore, I uncommented to connman line in /etc/network/interfaces and
> edited the /var/lib/connman/settings (same setting as above). When I restart
> the board I can see the SSID and even connect (from Windows) but I don't get
> an IP. --> So I think I have to change another small thing to get it working
> 100% (a problem with the DHCP?). Can you please point me towards the right
> direction??? Would be great!
Give this a shot:
sudo connmanctl tether wifi on ${wifi_ssid} ${wifi_password}
Regards,
--
Robert Nelson
https://rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/CAOCHtYgzCAv1M-csQYs_k-_%2BtR-B7AdmJxdpz87ws4eTqaeOFA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
