On Thursday, September 28, 2017 at 10:54:51 AM UTC-4, [email protected] wrote: > > Hello, > > I just purchased an X15 and the EMMC memory is rapidly filling up. > > 1. Is there a way to boot from an external USB hard drive? > or > 2. Can someone provide more detail directions on switching boot sequence > to boot directly from eSATA? > The reference manual is very vague on this. You need to unsolder and > resolder resistors to act as jumpers? There are perforated holes in the > circuit board where the resistors and jumpers are supposed to be. Are the > resistors supplied? Are they on the board? If so where are they? What are > their values in Ohms? How are the perforations on the board numbered 1-3 > from left to right or right to left? This needs to be much more detailed. > Why would you design a board that make switching the boot sequence so > difficult? How about just putting in some removable jumpers! > > Any detailed help and direction would be appreciated. > > Thanks > > MAB >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e2c7108c-f039-4fcc-a44e-5860eea3aa00%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
