Yes, sir I am trying with singal SPI0 but it's can't work board not booting.
With
uboot_overlay_addr0=/lib/firmware/PB-SPI0-ETH-WIZ-CLICK.dtbo
And using SPI1
uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo
It's detect but can't communicate.
If i test ifconfig
eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500
inet 169.254.136.246 netmask 255.255.0.0 broadcast 169.254.255.255
inet6 fe80::34ad:5dff:fe89:940 prefixlen 64 scopeid 0x20<link>
ether de:ad:be:ef:ca:fe txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 40 bytes 9097 (8.8 KiB)
TX errors 39 dropped 0 overruns 0 carrier 0 collisions 0
This results Tx errors
And randomly ip changed.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/7bbe8be5-3640-4db6-b411-527bbe920702%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
