Thanks it's working now. actually problem was : I didn't connect RST, INT pin and kept floating. Now it's connected and working fine.
One more question is it possible to change RST and INT pin to other port pin? On Thursday, 18 January 2018 22:29:41 UTC+5:30, RobertCNelson wrote: > > On Thu, Jan 18, 2018 at 10:32 AM, santosh aiwale > <[email protected] <javascript:>> wrote: > > Yes, sir I am trying with singal SPI0 but it's can't work board not > booting. > > > > With > > uboot_overlay_addr0=/lib/firmware/PB-SPI0-ETH-WIZ-CLICK.dtbo > > > > And using SPI1 > > uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo > > It's detect but can't communicate. > > If i test ifconfig > > > > > > eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500 > > inet 169.254.136.246 netmask 255.255.0.0 broadcast > 169.254.255.255 > > inet6 fe80::34ad:5dff:fe89:940 prefixlen 64 scopeid 0x20<link> > > ether de:ad:be:ef:ca:fe txqueuelen 1000 (Ethernet) > > RX packets 0 bytes 0 (0.0 B) > > RX errors 0 dropped 0 overruns 0 frame 0 > > TX packets 40 bytes 9097 (8.8 KiB) > > TX errors 39 dropped 0 overruns 0 carrier 0 collisions 0 > > > > This results Tx errors > > And randomly ip changed. > > Yeah, it works for me: > > Grabbed this image: > > https://rcn-ee.net/rootfs/bb.org/testing/2018-01-14/stretch-iot/ > > added > > uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo > > to /boot/uEnv.txt > > then ssh'ed thru the eth0 interface.. > > debian@beaglebone:~$ sudo ifconfig -a eth0 > eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500 > inet 192.168.0.149 netmask 255.255.255.0 broadcast 192.168.0.255 > inet6 fe80::94fb:95ff:fee3:4270 prefixlen 64 scopeid 0x20<link> > ether 96:fb:95:e3:42:70 txqueuelen 1000 (Ethernet) > RX packets 181 bytes 25287 (24.6 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 145 bytes 26141 (25.5 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh > git:/opt/scripts/:[b372df3221bb67a9a09c6b89df5110ca32a9e482] > eeprom:[A335PBGL00A21736GPB30111] > model:[TI_AM335x_PocketBeagle] > dogtag:[BeagleBoard.org Debian Image 2018-01-14] > bootloader:[microSD]:[/dev/mmcblk0]:[U-Boot 2018.01-00002-gcc9c2d1992] > kernel:[4.9.76-ti-r91] > nodejs:[v6.12.3] > uboot_overlay_options:[enable_uboot_overlays=1] > uboot_overlay_options:[uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo] > > > uboot_overlay_options:[enable_uboot_cape_universal=1] > pkg:[bb-cape-overlays]:[4.4.20180104.0-0rcnee1~stretch+20180104] > pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee2~stretch+20180104] > pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~stretch+20170830] > dmesg | grep pinctrl-single > [ 1.436073] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 > size 568 > END > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1541a127-ffbd-496b-8c72-6f6029030e07%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
