But it will change the MAC address, every time you load a new image on the memory card. --- Graham
== On Thursday, January 18, 2018 at 10:42:57 PM UTC-6, santosh aiwale wrote: > > > Thanks it's working now. > > actually problem was : I didn't connect RST, INT pin and kept floating. > Now it's connected and working fine. > > One more question is it possible to change RST and INT pin to other port > pin? > > On Thursday, 18 January 2018 22:29:41 UTC+5:30, RobertCNelson wrote: >> >> On Thu, Jan 18, 2018 at 10:32 AM, santosh aiwale >> <[email protected]> wrote: >> > Yes, sir I am trying with singal SPI0 but it's can't work board not >> booting. >> > >> > With >> > uboot_overlay_addr0=/lib/firmware/PB-SPI0-ETH-WIZ-CLICK.dtbo >> > >> > And using SPI1 >> > uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo >> > It's detect but can't communicate. >> > If i test ifconfig >> > >> > >> > eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500 >> > inet 169.254.136.246 netmask 255.255.0.0 broadcast >> 169.254.255.255 >> > inet6 fe80::34ad:5dff:fe89:940 prefixlen 64 scopeid >> 0x20<link> >> > ether de:ad:be:ef:ca:fe txqueuelen 1000 (Ethernet) >> > RX packets 0 bytes 0 (0.0 B) >> > RX errors 0 dropped 0 overruns 0 frame 0 >> > TX packets 40 bytes 9097 (8.8 KiB) >> > TX errors 39 dropped 0 overruns 0 carrier 0 collisions 0 >> > >> > This results Tx errors >> > And randomly ip changed. >> >> Yeah, it works for me: >> >> Grabbed this image: >> >> https://rcn-ee.net/rootfs/bb.org/testing/2018-01-14/stretch-iot/ >> >> added >> >> uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo >> >> to /boot/uEnv.txt >> >> then ssh'ed thru the eth0 interface.. >> >> debian@beaglebone:~$ sudo ifconfig -a eth0 >> eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500 >> inet 192.168.0.149 netmask 255.255.255.0 broadcast >> 192.168.0.255 >> inet6 fe80::94fb:95ff:fee3:4270 prefixlen 64 scopeid 0x20<link> >> ether 96:fb:95:e3:42:70 txqueuelen 1000 (Ethernet) >> RX packets 181 bytes 25287 (24.6 KiB) >> RX errors 0 dropped 0 overruns 0 frame 0 >> TX packets 145 bytes 26141 (25.5 KiB) >> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh >> git:/opt/scripts/:[b372df3221bb67a9a09c6b89df5110ca32a9e482] >> eeprom:[A335PBGL00A21736GPB30111] >> model:[TI_AM335x_PocketBeagle] >> dogtag:[BeagleBoard.org Debian Image 2018-01-14] >> bootloader:[microSD]:[/dev/mmcblk0]:[U-Boot 2018.01-00002-gcc9c2d1992] >> kernel:[4.9.76-ti-r91] >> nodejs:[v6.12.3] >> uboot_overlay_options:[enable_uboot_overlays=1] >> uboot_overlay_options:[uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo] >> >> >> uboot_overlay_options:[enable_uboot_cape_universal=1] >> pkg:[bb-cape-overlays]:[4.4.20180104.0-0rcnee1~stretch+20180104] >> pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee2~stretch+20180104] >> pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~stretch+20170830] >> dmesg | grep pinctrl-single >> [ 1.436073] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 >> size 568 >> END >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7ce4d378-e218-4850-85e4-8eec05af3a2f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
