Hi Robert, I've grounded TP1 (something like a via I suppose so I stuck a jumper in and connected the other end to P9-1). I checked with a thin tip multimeter touching the golden part of the via (not the jumper) and verified they're connected. I logged in as root and entered the following commands with the outputs beneath them (I've added separators here to make them clear, didn't press enter twice)
root@beaglebone:~# dd if=/opt/scripts/device/bone/bbbw-eeprom.dump ▒U3▒A335BNLTBWA50000BBWG00000+1 records in 0+1 records out 28 bytes copied, 0.00245283 s, 11.4 kB/s root@beaglebone:~# of=/sys/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0050/eeprom After disconnecting the TP1 GND connection I rebooted the device, typed ifconfig and didn't see wlan0 again, I tried connmanctl and then enable wifi there, same error as earlier. The output of the version.sh didn't change either: root@beaglebone:~# sudo /opt/scripts/tools/version.sh git:/opt/scripts/:[2ce750d881941c5189db9e189af90517e11c079f] eeprom:[A335BNLT*] dogtag:[BeagleBoard.org Debian Image 2017-08-31] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2017.09-rc2-00002-g7c9353] kernel:[4.9.45-ti-r57] nodejs:[v6.11.2] uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg:[bb-cape-overlays]:[4.4.20170728.0-0rcnee1~stretch+20170728] pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee1~stretch+20170829] pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~stretch+20170830] Is there a problem with what I'm doing or could this be about something else? Thanks for the help! Burak On Mon, Jan 29, 2018 at 6:40 PM, Robert Nelson <robertcnel...@gmail.com> wrote: > On Mon, Jan 29, 2018 at 12:24 AM, BURAK SONER <bsone...@ku.edu.tr> wrote: > > Hi Robert, > > > > Thanks for the quick answer! Here's the output: > > > > git:/opt/scripts/:[2ce750d881941c5189db9e189af90517e11c079f] > > eeprom:[A335BNLT*] > > Another case of eeprom mis-programmed: > > GND TP1 then run as root: > > dd if=/opt/scripts/device/bone/bbbw-eeprom.dump > of=/sys/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0050/eeprom > > reboot and everything will be okay.. > > > > dogtag:[BeagleBoard.org Debian Image 2017-08-31] > > bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot > > 2017.09-rc2-00002-g7c9353] > > kernel:[4.9.45-ti-r57] > > nodejs:[v6.11.2] > > uboot_overlay_options:[enable_uboot_overlays=1] > > uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/ > AM335X-PRU-UIO-00A0.dtbo] > > uboot_overlay_options:[enable_uboot_cape_universal=1] > > pkg:[bb-cape-overlays]:[4.4.20170728.0-0rcnee1~stretch+20170728] > > pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee1~stretch+20170829] > > pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~stretch+20170830] > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- Burak Soner -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAN3uON3iSVOT4kZ51pED54GrEFF-Ws8JNVM%2BLvwwzXsj%3D%3DZtiA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
