here are the results - it should be a BeagleBone Black - Wireless.
Something about the wlan0 not coming up too?
git:/opt/scripts/:[1aa73453b2c980b75e31e83dab7dd8b6696f10c7]
]eprom:[A335BNLTâ–’O
model:[TI_AM335x_BeagleBone_Black]
dogtag:[BeagleBoard.org Debian Image 2018-10-07]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot
2018.09-00002-g0b54a51eee]:[l ocation: dd MBR]
kernel:[4.14.71-ti-r80]
nodejs:[v6.14.4]
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-
00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade
<pkg>]
pkg:[bb-cape-overlays]:[4.4.20180928.0-0rcnee0~stretch+20180928]
pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517]
pkg:[kmod]:[23-2rcnee1~stretch+20171005]
pkg:[librobotcontrol]:[1.0.3-git20181005.0-0rcnee0~stretch+20181005]
pkg:[firmware-ti-connectivity]:[20170823-1rcnee1~stretch+20180328]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video
plugdev us ers systemd-journal i2c bluetooth netdev cloud9ide gpio
pwm eqep admin spi tisdk weston-launch xenomai]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1
root=/dev/m mcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M
net.ifnames=0 quiet]
dmesg | grep pinctrl-single
[ 1.107598] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size
568
dmesg | grep gpio-of-helper
[ 1.119419] gpio-of-helper ocp:cape-universal: ready
END
On Thursday, January 5, 2017 at 9:27:40 PM UTC-5, Kevin Gordon wrote:
>
> I have received a BBBW yesterday. I booted from a SD Card (which has image
> bone-debian-8.6-lxqt-4gb-armhf-2016-11-06-4gb) previously used on a BBB rev
> C. Everything functions the same on the BBBW as on the BBB except the
> network (wired) (the only item listed in connman gui) is not functioning
> (fair enough). When I run connmanctl> enable wifi BBBW I have error
> message:"Method "SetProperty" with signature "sv" on interface
> "net.connman.Technology" doesn't exist".
> Is there a solution for this please?
> Kevin.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/0170aac1-fbdc-461d-b290-0e41cc05ab43%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
