now config-pin p9.25 pruout it's working now but I need to use p8.11 as PRU
root@beaglebone:~/rfsend# cat > /sys/devices/platform/ocp/ocp\:P9_25_pinmux/state > pruout how I can use p8.11 as PRU ? List of avaliable pins root@beaglebone:~/rfsend# cat /sys/devices/platform/ocp/ocp\: > ocp:cape-universal/ ocp:P8_35_pinmux/ ocp:P9_16_pinmux/ > ocp:l4_wkup@44c00000/ ocp:P8_36_pinmux/ ocp:P9_17_pinmux/ > ocp:P8_07_pinmux/ ocp:P8_37_pinmux/ ocp:P9_18_pinmux/ > ocp:P8_08_pinmux/ ocp:P8_38_pinmux/ ocp:P9_19_pinmux/ > ocp:P8_09_pinmux/ ocp:P8_39_pinmux/ ocp:P9_20_pinmux/ > ocp:P8_10_pinmux/ ocp:P8_40_pinmux/ ocp:P9_21_pinmux/ > ocp:P8_13_pinmux/ ocp:P8_41_pinmux/ ocp:P9_22_pinmux/ > ocp:P8_19_pinmux/ ocp:P8_42_pinmux/ ocp:P9_23_pinmux/ > ocp:P8_27_pinmux/ ocp:P8_43_pinmux/ ocp:P9_24_pinmux/ > ocp:P8_28_pinmux/ ocp:P8_44_pinmux/ ocp:P9_25_pinmux/ > ocp:P8_29_pinmux/ ocp:P8_45_pinmux/ ocp:P9_26_pinmux/ > ocp:P8_30_pinmux/ ocp:P8_46_pinmux/ ocp:P9_27_pinmux/ > ocp:P8_31_pinmux/ ocp:P9_11_pinmux/ ocp:P9_41_pinmux/ > ocp:P8_32_pinmux/ ocp:P9_13_pinmux/ ocp:P9_42_pinmux/ > ocp:P8_33_pinmux/ ocp:P9_14_pinmux/ ocp:P9_91_pinmux/ On Tuesday, April 3, 2018 at 8:38:22 PM UTC-3, Sebastián Sáez wrote: > > I burn a new microSD card with the same image and now the linux it's boot >> >> bone-debian-8.10-seeed-iot-armhf-2018-02-01-4gb.img > > > Try again and now this is the otuput > > >> config-pin p8.11 pruout > > P8_11 pinmux file not found! >> bash: /sys/devices/platform/ocp/ocp*P8_11_pinmux/state: No such file or >> directory >> Cannot write pinmux file: /sys/devices/platform/ocp/ocp*P8_11_pinmux/state > > > here the new sytem info > > sudo /opt/scripts/tools/version.sh >> git:/opt/scripts/:[ad016da40de5805f1a6f981cbb6c454b1a7f244b] >> eeprom:[A335BNLTGW1ABBGW16050761] >> model:[TI_AM335x_BeagleBone_Green_Wireless] >> dogtag:[BeagleBoard.org Debian Image 2018-02-01] >> bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot >> 2018.01-00002-g9aa111a004] >> kernel:[4.4.113-ti-r145] >> nodejs:[v0.12.18] >> uboot_overlay_options:[enable_uboot_overlays=1] >> >> uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo] >> uboot_overlay_options:[enable_uboot_cape_universal=1] >> pkg:[bb-cape-overlays]:[4.4.20180126.0-0rcnee0~jessie+20180126] >> pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee2~jessie+20180104] >> pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~jessie+20170830] >> groups:[debian : debian adm kmem dialout cdrom floppy audio dip video >> plugdev users systemd-journal netdev i2c bluetooth cloud9ide gpio pwm eqep >> admin spi tisdk weston-launch xenomai] >> dmesg | grep pinctrl-single >> [ 1.212781] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 >> size 568 >> dmesg | grep gpio-of-helper >> [ 1.213903] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0 >> [ 1.214074] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1 >> [ 1.214218] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2 >> [ 1.214357] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3 >> [ 1.214497] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4 >> [ 1.214630] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5 >> [ 1.214762] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6 >> [ 1.214902] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7 >> [ 1.215048] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8 >> [ 1.215192] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9 >> [ 1.215327] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10 >> [ 1.215466] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11 >> [ 1.215609] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12 >> [ 1.215746] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13 >> [ 1.215882] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14 >> [ 1.216023] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15 >> [ 1.216634] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16 >> [ 1.216813] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17 >> [ 1.217031] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18 >> [ 1.217194] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19 >> [ 1.217341] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20 >> [ 1.217481] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21 >> [ 1.217619] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22 >> [ 1.217763] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23 >> [ 1.217902] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24 >> [ 1.218040] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25 >> [ 1.218193] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26 >> [ 1.218338] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27 >> [ 1.218486] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28 >> [ 1.218627] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29 >> [ 1.218769] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30 >> [ 1.218916] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31 >> [ 1.219057] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32 >> [ 1.219197] gpio-of-helper ocp:cape-universal: Allocated GPIO id=33 >> [ 1.219349] gpio-of-helper ocp:cape-universal: Allocated GPIO id=34 >> [ 1.219494] gpio-of-helper ocp:cape-universal: Allocated GPIO id=35 >> [ 1.219643] gpio-of-helper ocp:cape-universal: Allocated GPIO id=36 >> [ 1.219791] gpio-of-helper ocp:cape-universal: Allocated GPIO id=37 >> [ 1.219933] gpio-of-helper ocp:cape-universal: Allocated GPIO id=38 >> [ 1.220317] gpio-of-helper ocp:cape-universal: Allocated GPIO id=39 >> [ 1.220485] gpio-of-helper ocp:cape-universal: Allocated GPIO id=40 >> [ 1.220631] gpio-of-helper ocp:cape-universal: Allocated GPIO id=41 >> [ 1.220785] gpio-of-helper ocp:cape-universal: Allocated GPIO id=42 >> [ 1.220933] gpio-of-helper ocp:cape-universal: Allocated GPIO id=43 >> [ 1.221079] gpio-of-helper ocp:cape-universal: Allocated GPIO id=44 >> [ 1.221210] gpio-of-helper ocp:cape-universal: Allocated GPIO id=45 >> [ 1.221221] gpio-of-helper ocp:cape-universal: ready >> END > > > thanks you for your time > > > regards, > Sebastián > > > > On Tuesday, April 3, 2018 at 8:31:08 PM UTC-3, RobertCNelson wrote: >> >> On Tue, Apr 3, 2018 at 5:11 PM, Sebastián Sáez <otr...@gmail.com> wrote: >> > thank!, I do the cmd but now the linux is not booting >> > >> > this is the serial log >> >>> >> >>> U-Boot SPL 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29) >> >>> >> >>> Trying to boot from MMC1 >> >>> >> >>> >> >>> >> >>> U-Boot 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29 -0600), >> Build: >> >>> jenkins-github_Bootloader-Builder-32 >> >>> >> >>> >> >>> CPU : AM335X-GP rev 2.1 >> >>> >> >>> I2C: ready >> >>> >> >>> DRAM: 512 MiB >> >>> >> >>> No match for driver 'omap_hsmmc' >> >>> >> >>> No match for driver 'omap_hsmmc' >> >>> >> >>> Some drivers were not found >> >>> >> >>> Reset Source: Power-on reset has occurred. >> >>> >> >>> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >> >>> >> >>> Using default environment >> >>> >> >>> >> >>> Board: BeagleBone Black >> >>> >> >>> <ethaddr> not set. Validating first E-fuse MAC >> >>> >> >>> BeagleBone Black: >> >>> >> >>> Model: SeeedStudio BeagleBone Green Wireless: >> >>> >> >>> BeagleBone: cape eeprom: i2c_probe: 0x54: >> >>> >> >>> BeagleBone: cape eeprom: i2c_probe: 0x55: >> >>> >> >>> BeagleBone: cape eeprom: i2c_probe: 0x56: >> >>> >> >>> BeagleBone: cape eeprom: i2c_probe: 0x57: >> >>> >> >>> Net: eth0: MII MODE >> >>> >> >>> Could not get PHY for cpsw: addr 0 >> >>> >> >>> cpsw, usb_ether >> >>> >> >>> Press SPACE to abort autoboot in 2 seconds >> >>> >> >>> board_name=[A335BNLT] ... >> >>> >> >>> board_rev=[GW1A] ... >> >>> >> >>> switch to partitions #0, OK >> >>> >> >>> mmc0 is current device >> >>> >> >>> SD/MMC found on device 0 >> >>> >> >>> ** Bad device 0:2 0x82000000 ** >> >>> >> >>> ** Bad device 0:2 0x82000000 ** >> >>> >> >>> switch to partitions #0, OK >> >>> >> >>> mmc0 is current device >> >>> >> >>> Scanning mmc 0:1... >> >>> >> >>> gpio: pin 56 (gpio 56) value is 0 >> >>> >> >>> gpio: pin 55 (gpio 55) value is 0 >> >>> >> >>> gpio: pin 54 (gpio 54) value is 0 >> >>> >> >>> gpio: pin 53 (gpio 53) value is 1 >> >>> >> >>> switch to partitions #0, OK >> >>> >> >>> mmc0 is current device >> >>> >> >>> gpio: pin 54 (gpio 54) value is 1 >> >>> >> >>> Checking for: /uEnv.txt ... >> >>> >> >>> Checking for: /boot.scr ... >> >>> >> >>> Checking for: /boot/boot.scr ... >> >>> >> >>> Checking for: /boot/uEnv.txt ... >> >>> >> >>> gpio: pin 55 (gpio 55) value is 1 >> >>> >> >>> 1867 bytes read in 43 ms (42 KiB/s) >> >>> >> >>> Loaded environment from /boot/uEnv.txt >> >>> >> >>> Checking if uname_r is set in /boot/uEnv.txt... >> >>> >> >>> gpio: pin 56 (gpio 56) value is 1 >> >>> >> >>> Running uname_boot ... >> >>> >> >>> loading /boot/vmlinuz-4.4.125-bone22 ... >> >>> >> >>> 8506344 bytes read in 587 ms (13.8 MiB/s) >> >>> >> >>> uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ... >> >>> >> >>> uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ... >> >>> >> >>> loading /boot/dtbs/4.4.125-bone22/am335x-boneblack-uboot.dtb ... >> >>> >> >>> 50339 bytes read in 79 ms (622.1 KiB/s) >> >>> >> >>> uboot_overlays: [fdt_buffer=0x60000] ... >> >>> >> >>> uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... >> >>> >> >>> 1440 bytes read in 179 ms (7.8 KiB/s) >> >>> >> >>> uboot_overlays: loading /lib/firmware/BB-BBGW-WL1835-00A0.dtbo ... >> >>> >> >>> 4839 bytes read in 69 ms (68.4 KiB/s) >> >>> >> >>> failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND >> >>> >> >>> uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... >> >>> >> >>> 711 bytes read in 219 ms (2.9 KiB/s) >> >>> >> >>> libfdt fdt_check_header(): FDT_ERR_BADMAGIC >> >>> >> >>> failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC >> >>> >> >>> base fdt does did not have a /__symbols__ node >> >>> >> >>> make sure you've compiled with -@ >> >>> >> >>> uboot_overlays: loading /lib/firmware/AM335X-PRU-UIO-00A0.dtbo ... >> >>> >> >>> 883 bytes read in 162 ms (4.9 KiB/s) >> >>> >> >>> libfdt fdt_check_header(): FDT_ERR_BADMAGIC >> >>> >> >>> failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC >> >>> >> >>> base fdt does did not have a /__symbols__ node >> >>> >> >>> make sure you've compiled with -@ >> >>> >> >>> uboot_overlays: loading /lib/firmware/univ-bbgw-EW-00A0.dtbo ... >> >>> >> >>> 82622 bytes read in 89 ms (906.3 KiB/s) >> >>> >> >>> libfdt fdt_check_header(): FDT_ERR_BADMAGIC >> >>> >> >>> failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC >> >>> >> >>> base fdt does did not have a /__symbols__ node >> >>> >> >>> make sure you've compiled with -@ >> >>> >> >>> loading /boot/initrd.img-4.4.125-bone22 ... >> >>> >> >>> 5415890 bytes read in 392 ms (13.2 MiB/s) >> >>> >> >>> debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 >> >>> root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M >> >>> net.ifnames=0 quiet] ... >> >>> >> >>> debug: [bootz 0x82000000 0x88080000:52a3d2 88000000] ... >> >>> >> >>> ERROR: Did not find a cmdline Flattened Device Tree >> >>> >> >>> Could not find a valid device tree >> >> Okay that was weird, i'll retest that tomorrow at work.. >> >> 4.4.125-bone22 + u-boot overlays should work.. >> >> <weird> >> libfdt fdt_check_header(): FDT_ERR_BADMAGIC >> failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC >> base fdt does did not have a /__symbols__ node >> make sure you've compiled with -@ >> </end> >> >> They were compiled with -@ wonder what failed... >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2270c8c8-537c-48cd-a4c5-dd8a4a9ea416%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.