On Wed, Apr 4, 2018 at 12:13 PM, Robert Nelson <[email protected]> wrote: > On Wed, Apr 4, 2018 at 12:02 PM, Robert Nelson <[email protected]> > wrote: >> On Wed, Apr 4, 2018 at 9:46 AM, Sebastián Sáez <[email protected]> wrote: >>> now config-pin p9.25 pruout it's working now but I need to use p8.11 as PRU >>> >>>> root@beaglebone:~/rfsend# cat >>>> /sys/devices/platform/ocp/ocp\:P9_25_pinmux/state >>>> pruout >>> >>> >>> how I can use p8.11 as PRU ? >>> >>> List of avaliable pins >>> >>>> root@beaglebone:~/rfsend# cat /sys/devices/platform/ocp/ocp\: >>>> ocp:cape-universal/ ocp:P8_35_pinmux/ ocp:P9_16_pinmux/ >>>> ocp:l4_wkup@44c00000/ ocp:P8_36_pinmux/ ocp:P9_17_pinmux/ >>>> ocp:P8_07_pinmux/ ocp:P8_37_pinmux/ ocp:P9_18_pinmux/ >>>> ocp:P8_08_pinmux/ ocp:P8_38_pinmux/ ocp:P9_19_pinmux/ >>>> ocp:P8_09_pinmux/ ocp:P8_39_pinmux/ ocp:P9_20_pinmux/ >>>> ocp:P8_10_pinmux/ ocp:P8_40_pinmux/ ocp:P9_21_pinmux/ >>>> ocp:P8_13_pinmux/ ocp:P8_41_pinmux/ ocp:P9_22_pinmux/ >>>> ocp:P8_19_pinmux/ ocp:P8_42_pinmux/ ocp:P9_23_pinmux/ >>>> ocp:P8_27_pinmux/ ocp:P8_43_pinmux/ ocp:P9_24_pinmux/ >>>> ocp:P8_28_pinmux/ ocp:P8_44_pinmux/ ocp:P9_25_pinmux/ >>>> ocp:P8_29_pinmux/ ocp:P8_45_pinmux/ ocp:P9_26_pinmux/ >>>> ocp:P8_30_pinmux/ ocp:P8_46_pinmux/ ocp:P9_27_pinmux/ >>>> ocp:P8_31_pinmux/ ocp:P9_11_pinmux/ ocp:P9_41_pinmux/ >>>> ocp:P8_32_pinmux/ ocp:P9_13_pinmux/ ocp:P9_42_pinmux/ >>>> ocp:P8_33_pinmux/ ocp:P9_14_pinmux/ ocp:P9_91_pinmux/ >> >> Okay firgured this out, you have the >> "model:[TI_AM335x_BeagleBone_Green_Wireless]" >> >> You'll need to make a choice: >> >> PRU or WIFI... >> >> P8.11 is gpmc_ad13.mmc2_dat1 >> >> https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-BBGW-WL1835-00A0.dts#L25 >> >> You can kill wifi via: >> >> disable_uboot_overlay_wireless=1 >> >> https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays > > Correction, here's a hack (1), we can stick the wl18xx into 1 bit mode: > > debian@test-bbb-2:~$ cd /opt/source/bb.org-overlays/ > debian@test-bbb-2:/opt/source/bb.org-overlays$ git pull > debian@test-bbb-2:/opt/source/bb.org-overlays$ cp > src/arm/BB-BBGW-WL1835-1BIT-00A0.dts src/arm/BB-BBGW-WL1835-00A0.dts > debian@test-bbb-2:/opt/source/bb.org-overlays$ make > debian@test-bbb-2:/opt/source/bb.org-overlays$ sudo make install > > 1: > https://github.com/beagleboard/bb.org-overlays/commit/093227e24835b73d95090fa4d0c17ea13ae322db
NM, this "BB-BBGW-WL1835-1BIT-00A0.d hack" will only work with v4.16.0, which should be out in a few days.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYi4xMPqMJeFq1FYPJqbHaKuYeq-KgSgZSatCZabZtZ5sg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
