Ok, for me it is not important to flash emmc. I can use system from card. And I want use this method. So, what should I do step by step? For this momet I have got old version on the emmc and ne we on sd card. If i remove card, BBB boot from emmc. If I insert card, BBB boot from sd card. But when I am using system form card there is problem with this PWM by adafruit in python. When I use this comand: sudo dd if=/dev/zero of=/dev/mmcblk1 bs=1M count=100 after rebooting BBB dont get up. All leds are off. With card, without don't matter. BBB is off.
wt., 25 wrz 2018, 17:27 użytkownik Robert Nelson <robertcnel...@gmail.com> napisał: > > * I don't know enough about the flashing process to know if it is > done on > > a "by file" basis, or is done "by block". If the former, getting the used > > space of the SD card down to around 1.5-1.8GB might be sufficient; if it > is > > by blocks, you'd have to somehow compress the SD card free space and > shrink > > the partition... > > Perhaps Mr. Nelson could chime in on this part of the mysterious > BBB > > flashing process? > > So it's just rsync that copes files, so when it error's out, it really > just error's out from lack of space.. > > One option, for the 2GB eMMC that I've slightly played with but > haven't tested in a flashing situation... Btrfs with compression.. > > With BTFS with lzo, cut down the iot image from 3.3G to 1.6-ishG... > Well somewhere around there, it's been a few months.. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/VVhdRE72JFE/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAOCHtYggtFGmyvt3euvo7QLUtfJj7PffCtf9t%3DXA5%2B7twAvqQA%40mail.gmail.com > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAK-qOpDGWWqHSHh11paXtPOSWC%3DSEkDDyrQSYp6EoRSQNnFUQQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.