I had the same problem with my BBBW. I tried both methods to make the wifi work, but none was completly succesfull. The "dd" method made no difference, the board still saw it as simple BBB. The second method was succesful - the board was set as BBBW but when I tried turning the Wifi on it crashed. I tried re-booting it but I can't make the ssh work.(After turning the Wifi on it worked for 3 or 4 times,but after that nothing ) After Reboot USR0 and USR2 stay on but can't connect. sometimes all Leds turn off. Can the problem be caused by the charging? I don't use a separate power supply ,just the usb cable. On Sunday, 18 November 2018 22:41:27 UTC+2, RobertCNelson wrote: > > On Sun, Nov 18, 2018 at 2:35 PM <[email protected] <javascript:>> wrote: > > > > Okay, now I'm curious. > > > > I was too lazy to ground a pin and run "dd", so I tried the "dtb" > solution first. It worked. > > > > I can understand why the "dd" to fix the corrupted eeprom works. (That's > RobertCNelson's solution.) > > Why does editing the "dtb" line in /boot/uEnv.txt work? (That's adam.p's > solution.) > > And which is the better solution? > > With the corrupt eeprom, it's detecting it as a normal BBB.. > > Thus the dtb= override will work, you'll just have to remember it for > that board. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c861ed92-7d39-4811-bcd5-91db59a15453%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
