I am trapping serial output on BOTH the target board and a BBB booting the SAME SD card, with the only difference being the setting of init_console. After each has run as far as it will - in the case of the BBB I get a login prompt. I vimdiff the serial output captures.
On the BBB I get alot of console output from the end of all the eqep driver setup through the login prompt. On the target all serial output stops with the eqep output - but the LEDS continue to be active. As they are soft - something is still executing -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5de7da07-37ca-4441-8361-7bfb5bed4c10%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
